User Guide

51
V
C
R
P
A
R
T
"INITIAL SET" Menu 1
< Press the MENU button, then VCR MENU screen will
appear.
< Select the 'INITIAL SET' menu by pressing the
b/5buttons, then press the t button.
< 'INITIAL SET' menu screen will appear.
TAPE (Recording/Playback Time of video Tape)
Press the
t button to choose the type of video
cassete.
REPEAT PLAY
To watch a tape over and over until the
H(STOP)button is
pressed, set the REPEAT PLAY option to ON as follows:
1. Select the 'REPEAT PLAY' menu by pressing
the
b/5buttons.
2. Press the
t button to select the REPEAT
PLAY(ON) or the REPEAT PLAY(OFF).
At REPEAT PLAY(ON), the tape will play over and
over until the repeat mode is cancelled.
AUTO CLOCK SETTING
1. Select the 'AUTO CLOCK' menu by pressing
the
b/5buttons.
2. When shipped from the factory, the AUTO CLOCK
setting is set to ON. If you do not want the clock to
be automatically set, press the
tbutton to set this
option to OFF.
Note:
The Auto Clock Adjustment will automatically adjust the
clock after approximately 3 minutes after a power
outage or when the unit is unplugged and then plugged
back in as long as the following criteria is met:
< The Auto Clock Adjustment will not work if Timer
Recording is in the Standby mode (T-REC indicator is lit).
< The Auto Clock Adjustment will not work when the VHF
reception is poor.
< The Auto Clock Adjustment will only work with some
Cable, Satellite or local antenna systems.
< The Auto Clock Adjustment will be disabled when Auto
Clock Setting is set to OFF, see section above.
< If the DVD/VCR is unplugged, the clock must be set
again.
< If the clock does not automatically adjust, SET THE
CLOCK MANUALLY AS DESCRIBED ON PAGE 48.
SETTING THE STANDARD TIME
If you live in an area that has broadcast stations in 2
different time zones, the product may recognize the
wrong time zone when auto Setting the clock/date.
1. In the 'INITIAL SET' menu, select the 'STANDARD
TIME' menu by pressing the
b/5buttons and then
press the
t button.
2. Select your time zone by pressing the
b /5 buttons, or select "AUTO", which will
automatically set the time zone.
D
C
B
A
INITIAL SET
MOVE: SELECT: EXIT:
TAPE
REPEAT PLAY
AUTO CLOCK
STANDARD TIME
DAYLIGHT SAVING
TIME
<T120>
<OFF>
<ON>
<OFF>
<T160>
INITIAL SET
MOVE: SELECT: EXIT:
TAPE
REPEAT PLAY
AUTO CLOCK
STANDARD TIME
DAYLIGHT SAVING
TIME
<T120>
<OFF>
<ON>
<OFF>
<ON>
INITIAL SET
MOVE: SELECT: EXIT:
TAPE
REPEAT PLAY
AUTO CLOCK
STANDARD TIME
DAYLIGHT SAVING
TIME
<T120>
<OFF>
<ON>
<OFF>
<OFF>
A
B
C
STANDARD TIME
SELECT: EXIT:
EASTERN TIME
CENTRAL TIME
MOUNTAIN TIME
PACIFIC TIME
AUTO CLOCK
MOVE: SELECT: EXIT:
TAPE
REPEAT PLAY
AUTO CLOCK
STANDARD TIME
DAYLIGHT SAVING
TIME
<T120>
<OFF>
<ON>
<0FF>
INITIAL SET
D
VCR MENU
MOVE: SELECT: EXIT:
CLOCK SET
TIMER RECORDINGS
CH SET
INITIAL SET
LANGUAGE<ENG>
(VCR MENU SCREEN)
TAPE<T120> TAPE<T160>
Note:
< EASTERN : GMT - 5 hours
< CENTRAL : GMT - 6 hours
< MOUNTAIN : GMT - 7 hours
< PACIFIC : GMT - 8 hours
< AUTO : AUTO SET (GMT : Greenwich Mean Time)