User Guide

61
V
C
R
P
A
R
T
One Touch Timer Recording (OTR)
OTR is simple and convenient way to make a timed
recording without programming to the Timer.
When the OTR is completed,the DVD/VCR automatically
enters the STOP mode.
PREPARATION
< Turn on the TV and DVD/VCR.
< Tune the TV to the channel that receives the DVD/VCR
signal.
< Set the DVD/VCR to the VCR mode by pressing the VCR
button when the VCR indicutor is not on the front panel
display.
MAKE SURE THAT
< The clock is adjusted to the current time.
< The safety tab is not removed from the cassette.
< The tape is long enough to record the program.
CHANNEL SELECTION
Press the channel direct access buttons or CH buttons
to select the channel to be recorded.
SPEED SELECTION
Press the SPEED button to select the desired tape
speed (SP/SLP).
If you don't press the SPEED button, SPEED mode sets
to the current speed, automatically.
PRESS THE REC/OTR BUTTON
Press the REC/OTR button twice on the remote control.
END TIME SELECTION
< Press the t button to increase the END TIME
< The recording length progress with each press of the
(
t) button is according to the following schedule.
10
w 20 w 30 w 40 w 50 w 1:00 w 1:30 w
2:00 w 2:30 w 3:00 w 4:00 w 5:00 w 6:00 w
7:00 w 8:00 w 9:00 w 0:00
"10" means 10 minutes
"1:00" means one hour
< To cancel OTR, press the t button repeatedly until
"OTR
w 0:00" appears ( in the OTR mode)
Note:
< OTR is convenient, especially;
-When you have an unexpected visitor.
-When you receive a call.
-When you are called away unexpectedly.
< You can choose the DVD/FM/AV1,2 function during
VCR recording.
4
3
2
1
OTR 0 : 00 SP
PRESS TO SET LENGTH
02
3
1
2
OTR 0 : 10 SP
PRESS TO SET LENGTH
02
4
REC COPY CHANNEL
REC COPY CHANNEL
VCR button
Numeric
buttons
CH b/5
buttons
Direction
buttons
REC/OTR
buttons