User Guide

DISC 1
DISC 2
DISC 3
DISC 1
DISC 2
DISC 3
STAND BY
REMOTE
SENSOR
NIGHT MODE
NIGHT MODE
PHONES
VOLUME
UP
DOWN
FUNCTION
STEREO
MEMORY
SURROUND
MODE
DOLBY
DIGITAL
FM MODEBAND
DTS
TUNING MODE
TUNING/PRESET
DIMMER
TONE
POWER
STANDBY/ON
Press the power button on the front of the DVR99 or on the remote.
Turn the FUNCTION knob on the front of the DVR99 until AM or FM appears on the display or press
the TUNER button on the remote. NOTE: The TUNER button on the remote must be pressed in or-
der to control the TUNER functions with the remote.
Press the BAND button on the front of the DVR99 or on the remote to select AM or FM.
Press the TUNING MODE button on the front of the DVR99 until TUNING appears in the display,
then press the TUNING/PRESET or buttons on the front of the DVR99 or on the
remote repeatedly until the desired station appears in the display. NOTE: Pressing for about a sec-
ond and releasing the TUNING/PRESET or buttons activates the auto tuning
function allowing the tuner to automatically scan to the next clear station. Pressing the TUN-
ING/PRESET ..................or buttons for less than a half of a second changes the frequency
by one step.
To adjust the volume use the VOLUME knob on the front of the DVR99 or the VOLUME +/- buttons
on the remote. IMPORTANT NOTE: All radio stations are broadcast in mono or 2 channel stereo so
it is recommended that when the DVR99 is in the TUNER mode that you select the STEREO button
on the front of the DVR99.
To memorize a station, press the TUNING MODE button until TUNING appears in the display, then
press the TUNING/PRESET or buttons on the front of the DVR99 or on the re-
mote repeatedly until the desired station appears in the display. Press the MEMORY button on
the front of the DVR99 or on the remote and MEMO will appear and flash in the display for 5 sec-
onds. While MEMO is flashing in the display select a preset number by pressing the TUNING/PRE-
SET ..................or buttons on the front of the DVR99 or on the remote then press then
MEMORY button again to store the station . Repeat this step to store additional stations.
NOTE: You can store up to 30 stations for each band.
To listen to a radio station stored in memory press the TUNING MODE button until PRESET ap-
pears in the display, then press the TUNING/PRESET or buttons on the front of
the DVR99 or on the remote control to select the desired preset station.
1
1
STEPS
2
3
3
4
4
5
1
2
6
6
7
3
4
6
2
6
7
5
5
5
Again this is only a “QUICK-START GUIDE” that
covers basic connection and operation. The
DVR99 has many advanced features and operat-
ing functions that are covered in detail in the
complete owner’s manual
SECTION
3
PLAYING THE RADIO
DVR99 500 WATT 3 DVD HOME THEATER RECEIVER
4
7
4
DVD/CD/MP3
CD-R/CD-RW/COMPATABLE
Disc 1
Disc 2
Disc 3
6
6