www.optimate3sp.com Automatic charger for 12V lead-acid batteries of from 2 to 32 Ah. Not for charging dry cell or NiCad batteries. Input supply : 220-240V~. Output current : 0.6A, 12W (max.).
Instructions for Use : IMPORTANT : Read before charging. SAFETY WARNING and NOTES Batteries emit EXPLOSIVE GASES - prevent flame or sparks near batteries. Disconnect AC power supply before making or breaking DC/battery connections. Battery acid is highly corrosive. Wear protective clothing and avoid contact. In case of accidental contact wash immediately with soap and water. Check that the battery posts are not loose; if so, have the battery professionally assessed.
NOTE : A battery left deep discharged for an extended period which may result in permanent damage to one or more cells, may heat up considerably during charging. Stop charging immediately if the battery casing temperature becomes uncomfortably hot to touch.
AVAILABLE ACCESSORIES TM72 TM78 TM76 TM71 TM77 TM74 TM73 2.5m TM75 TM70 LIMITED WARRANTY 4 #669 15.02.2006 TecMate (International) SA, Sint-Truidensesteenweg 252, B-3300 Tienen, Belgium, makes this limited warranty to the original purchaser at retail of this product. This limited warranty is not transferable. TecMate (International) warrants this battery charger for two years from date of purchase at retail against defective material or workmanship.
