User's Manual

input way will appear on the top left of the screen.
Letter (Capital, Normal)
Enter edit page, press “#”and switch the input mode to “letter”, then press the keys on keypad,
selected letters will appear on the screen.
Press the number key can get the first letter marked on the key, press twice quickly can get the
second letter marked on the key. Similarly, if the letter you want to input have the same key with
the former letter, please wait until the cursor appears again, then input the new letter.
For example, if you want to input “ok”, you need to press the “6” key three times continuously
and get “o”, then press the key”5” twice, “ k” will appear on the screen. Press right soft key, you
can delete the text you input.
Number
Enter “edit” mode, press “＃” key you can change the input way to “ number”. Then press
the keys, number will appear on the screen. The key 0-9 separately represents the figure from 0 to
9. You can press corresponding key to get desired number. Press right soft key can delete the
number you input.
Punctuation
Enter the “edit” mode, press key “1”, the punctuations will appear. You can scroll the direction key
so that the cursor can select desired punctuation. Press left soft key can select the desired
punctuation.
5. Care and Maintenance
Maintenance of battery
•Your device is powered by a rechargeable battery. It is necessary to have the battery charged
when it is going to wear out. The full performance of a new battery is achieved only when it is
fully wore out.
•Unplug the charger from the electrical plug and the device when not in use. Do not leave fully a
charged battery connected to a charger over a week, since overcharging may shorten its lifetime.
•Temperature tends to affect the limit of battery to be charged. Therefore, it is necessary for the
battery to be cooled or warmed before it is charged. If the temperature of batter exceeds 40ºC ,the
battery cannot be charged.
• Use the battery only for its intended purpose and avoid short-circuiting. Accidental
short-circuiting can occur when a metallic object causes direct connection of the positive (+) and
negative (-) terminals of the battery.
•Do not use damaged battery.
•Leave the battery in hot or cold places will reduce the capacity and lifetime of the battery. A
device with a hot or cold battery may not work temporarily, even when the battery is fully
charged.
•Do not dispose of batteries in a fire as they may explode. Dispose of batteries according to local
regulations.
Care of maintenance of your device
The suggestions below will help you protect your warranty coverage.
•Keep the device and accessories out of the reach of small children.