Mobile explode picture Item Descripition Item Descripition 1 2 LCD_Lens 3 LCD Advertising film Keypad_asm 4 FRONT_HOUSING 5 LCD 6 PCBA 1
7 DOM 8 MIC 9 SPK 10 CAM 11 REAR_HOUSING 12 Battery 13 CAM_Lens 14 Battery_Cover 2
Foreword Valuable mobile phone user, thank you for choosing our mobile phone! Our mobile phones reply to the People's Republic of China communication industry standards and the European standards and are approved for GSM networks. Your phone may be used internationally with various networks depending on your roaming arrangements with your service provider. To use this phone you must subscribe to a GSM service from a provider.
1. Quick start Install SIM card This phone supports two GSM SIM cards. Find SIM card’s groove in the back of the phone and slide it completely there. During installation, please make sure the chip is facing downwards and pay attention to slot direction. Installing T-flash card 1. First switch off the phone and remove the battery. 2. Place the memory card into the holder with the metal contacts facing down inserts to the holder.
2. Call function Dialing 1. Direct dial In standby mode, press the corresponding numeric keys to enter the phone number that you want to dial, including necessary area codes. Short press the right soft key to delete one character, and long press to delete all inputs, if only one SIM card is inserted, press the dial/receive key to dial, if two SIM cards are inserted, the phone displays select SIM card page, if you select SIM1 then use SIM1 to dial, you select SIM2, then use SIM2 to dial. 2.
the network operation company. Receiving calls When there is an incoming call, the phone will give corresponding alert, if your network supports caller ID, the screen will display caller’s name or number (depending on whether there is information of the caller in your phonebook).
3. Menu functions Phonebook You can use the phone's contacts feature to save the contact name, number. The phone can save contacts on the phonebook, the number of contacts that can be stored in a SIM card varies according to their capacity. Enter the contacts screen, you can add new contact, view contacts list and select the contacts to call or other operations. SMS Message service is a network dependent function, which allows you to send, receive and edit all kinds of messages.
box, the operation is the same with inbox. Sent messages If SMS is sent successfully, then it will be stored in the sent messages box. But automatically save messages need to select, other operation is the same with inbox. SMS Settings SIM settings: you can choose either of modes, custom different parameters, including set short message center number, set delivery report, reply path, voicemail server. Memory status: can view the memory storage status.
etc. Advanced settings: in this function, you can choose menu to set the call function, include Auto redial, Answer mode etc. Please refer to the actual function of your phone. Palmchat Palmchat is a free application launched by TECNO, providing instant communication service to MTK platform mobile phone users. Palmchat has online-chatting function, which connects mobile phones in different mobile networks.
Time and date: in this function, you can choose menu to set the current time and date in idle screen, include set home city, set time/date and format etc. Language: in this function, you can choose the language provided by the phone. Dedicated keys: you can change the navigation keys function corresponding to the shortcut in the idle screen. Display: in this function, you can choose menu to set the idle screen display, include wallpaper, screen auto lock, power on/off display etc.
phone password on or off are required to enter the correct password. Once opened this feature, the phone will prompt you to enter password, when turned on every time. You can make changes on the phone password. Network settings You can automatically or manually select the network, the phone SIM card will be based on the network where the first selection was done, select Manual, you need to select the SIM card registered with the network operator that can use the same network.
operations. After taking pictures, press the back button to return to camera preview screen, press the left soft key to enter options, can take pictures to send and delete. Recorder Your phone is fitted with sound recorder. Enter the recording screen, you can choose new record, or view the recorder list, or settings recorder storage and audio quality. Torch Into the torch interface, select on, torch light; select off, torch dark. In the idle screen, long press the OK key, torch on or off quickly.
the left/right navigation key to pull the progress bar forward or backward; press “1” key or the up navigation key to switch full screen, press the */# key to adjust the volume, press the down navigation key to stop playing. FM radio The phone supports FM radio. In FM radio interface, press the OK key to open/close FM; press the up/down navigation key to move forward /backward 0.
on according to the demand. Bluetooth technology can connect electronic devices wirelessly. Because bluetooth communicates by radio, so in your phone and another bluetooth device do not need to be in the opposite direction, please maintain a maximum distance between two devices that is not more than 10 meters during communication. In some countries or regions may be developed within a number of provisions restricting the use of Bluetooth devices, please contact your local authorities.
Description: For mobile specific features, in case of version upgrade without notice, the company has the final interpretation of this description.
4. Input methods This phone provides diversified input modes for you, when you are editing SMS and adding contacts on the phonebook. Use the # key to switch between different input methods. When editing the key controls: The right soft key: press to clear one character, long press to clear all. The power on/off key: return to the idle screen. The * Key: in every input status, press this key to call out punctuation and symbol input frame. ABC (abc) input method Each key is used to input several characters.
5. Warning Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
requirements may not comply with FCC RF exposure requirements, and should be avoided. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
