User Manual Mobile Phone FCCID: 2ADYY-T420 TECNO MOBILE LIMITED RMS 05-15, 13A/F., SOUTH TOWER, WORLD FINANCE CTR, HARBOUR CITY, KLN, HK. P lease read these instructions for use and have a good look at the illustration before using.
Warning: This device complies with Part 15 of the FCC Rules. Operation is subject tothe following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
RF Exposure Information: The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device Types Mobile Phone (FCC ID: 2ADYY-T420) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use when properly worn on the body is 1.163W/kg and head is 0.903W/kg. This device was tested for typical body worn operations with the back of the handset kept 5mm from the body.
Thank you for choosing this mobile phone. For a better use of the phone, please read the manual carefully. This color-screen phone is designed for use on the GSM network. The phone supports dual-card online at the same time, you remove the two phones at the same time bring the trouble to truly enjoy a life of science and technology.
Contents CHAPTER 1 SAFETY INFORMATION ······························································ 7 1.1 GENERAL PRECAUTIONS ··································· 7 1.2 BATTERY PRECAUTIONS ···································· 8 1.3 CHARGER PRECAUTIONS································· 10 CHAPTER 2 PHONE INTRODUCTION··························································· 12 2.1 SPECIFICATION ················································ 12 2.
3.
Chapter 1 Safety Information 1.1 General Precautions Please turn off your phone in an airplane, hospital or areas where the phone may disturb the operation of sensitive or medical equipment. Please use your phone in accordance with the rules of the areas.
Do not dismantle or refit the phone; otherwise the phone may break down or cause electric leakage or other problems. Do not use needle, stylus or pointed objects to press the keys; otherwise the phone may break down and malfunction. Prevent the phone from nearing magnetic objects such as magnetic cards, credit cards, floppy disks. The radio wave of the phone may erase the information stored on them. Do not expose the phone to humidity, water or other liquid; otherwise the phone may break down.
needle and necklace; otherwise leakage, excessive heat, burst and fire may occur. Do not dismantle or refit the battery or weld the contact points otherwise leakage, excessive heat, burst and fire may occur. The liquid leaked from the battery may cause blind if entering into the human eyes. In this case, please wash the eyes with clean water immediately (do not rub the eyes) and go to hospital as soon as possible.
Do not charge the batter over 24 hours on end. The battery life is limited and will be reduced after long and frequent charging. If it doesn’t work after several charging, it indicates the end of its life. You need to replace it with new battery of specified model. Do not dispose of the battery with domestic garbage; instead you should dispose of it in line with the regulations. 1.
Do not use the charger in places of high humidity such as bathroom; otherwise electric leakage, fire and other problems to the charger. Do not touch the charger, power cord or power socket with a wet hand; otherwise electric shock may occur. Do not put heavy objects upon the power cord or refit it. Otherwise electric shock or fire may occur. Disconnect the charger with electric power during cleaning and maintenance.
Chapter 2 Phone Introduction 2.1 Specification The host machine: Model No. Size (length x width x thickness) Weight Lithium Cell Model No. Nominal voltage Charge limited voltage Rated capacity Perpetual standby time Call duration time Traveling charge Model No. Input 2.2 SIM Card Before you use your phone, you must insert your SIM card. It’s your key to enter into the GSM network. All the information related to the connection to the network and logs of calls is recorded in the metal area of the SIM card.
names and calls in the phonebook as well as text messages. You can also take the SIM card out and put it into another GSM mobile phone. (The new phone will read the SIM card automatically) To prevent the loss and damage of information stored on the SIM card, the metal area of the SIM card should not be touched and the card should be kept away from electrical and magnetic area. Once the SIM card is damaged, you are unable to enter into the GSM network.
Insert the TF card into the TF slot. When the TF card needs to be taken out, turn the phone off and take the TF card out of the slot. 2.3 Battery 50% of the battery power is charged initially and can be used after unpacking. The new battery needs to be charged for at least 14 hours. After the power is used up (with no power to turn the phone on) for the first time, charge the battery fully. For the second time, charge the battery fully again after the power is used up.
The battery symbol appeared at the top right corner indicates the state of charging. If the phone is turn off during charging, a charging indication picture will be shown instead signifying that charging is in progress. If the phone is in low battery and being used overly, it may take a while for the charging icon to appear on the screen after charging is started. When the charging bars are full and steady, it means charging is complete.
working condition and running mode. - Make sure that the battery is well installed and can not be removed during charging. - When charging is complete, disconnect the charger from the phone and electric power. - If the charger has not been disconnected from the phone and electric power, charging will start again after a certain amount of battery power is used in a period of 5~8 hours. This is not advised due to the fact that doing so may have some adverse impact on the life of the battery. 2.
a password for unlocking the phone). After the SIM card is decoded successfully, your phone will search for an available network (displayed on the screen). Once the connection is made, the icon of the network supplier will appear in the center of the screen. Now the phone is in standby and ready to use. *Note: if “Emergency number” appears, it means you are out of the service area of the network. However, you can still make emergency calls according to the signal strength of your phone.
Chapter 3 Menu Details 3.1 Phonebook 1. Contacts Quick search: Enter into the browse screen of the phonebook. You can enter corresponding information in the searching column below to sort the entries out. Modes of searching include: 1. English (lower case); 3. Number. Press the # Key to switch among input methods. Add new contact: choose the storage of the new entry to add.
- 4. Copy contacts: copy all the entries from the phone to the card1, card2 ; copy all the entries form the card to the phone, or copy all the entries form the card1 to card 2; or vice versa. - 5. Move contacts: move all the entries from the phone to the card1, card2 ; copy all the entries form the card to the phone, or copy all the entries form the card1 to card 2 or vice versa. - 6. Delete all contacts: Select to delete all the contacts from SIM card or from the phonebook. 3.2 Messages 1.
*Note: some of the cities and district message centers do not support message over than 70 characters (or 160 English texts). 2.Inbox: Check the received messages. When the Inbox message list appears, press Ok key to read the message. You can choose the following options: - View: View the information - Reply: reply to the sender of the message. - Call sender:Call the sender number - Forward: forward the message. - Delete: delete the message. - Delete all: delete all message.
- Send :send the message - Edit: Edit this information - Delete: delete the message. - Delete All: delete all the message in the Drafts. - Copy to SIM Card (Copy to Phone): copy the message from the phone to the SIM card, or vice versa. - Move to SIM Card (Move to Phone): move the message from the phone to the SIM card, or vice versa. - Copy All: copy all from SIM card to the phone or from the phone to SIM - Move All: move all from SIM card to the phone or from the phone to SIM 4.
5.Sent messages: Check the message has been sent. When Outbox mailing list, press OK to read the message. You can choose the following options: - View: View the information - Forward: forward the message. - Delete: delete the message - Delete All: delete all the message in the sent messages. - Copy to SIM Card (Copy to Phone): copy the message from the phone to the SIM card, or vice versa. - Move to SIM Card (Move to Phone): move the message from the phone to the SIM card, or vice versa.
Dialled Calls: to take the record of dialed calls. Missed Calls: to take the record of missed calls. Received Calls: to take the record of received calls. Delete call : Delete all the record Call settings Sim1/2 call settings 1. Call waiting: You can activate it to be notified of incoming calls while you have a call in progress 2. Call divert: -Unconditional: divert incoming calls to another number unconditionally.
3.4 Settings Phone Settings Date and time: Set time and date of the phone Language: set the language for the menu Writing language: Select Need writing language. Display: - Wallpaper: select the wallpaper for standby. - Screen Auto Lock: - the keypad will lock itself after the phone is unused for a specified time you set.
on or turn off this mode to save your battery power.Many options such as brightness,ring,Bluetooth can be set here. - Low power mode:Power saving mode will be turned on automatically until the battery percent you set.All options is set to default and cannot be changed. Misc. settings: set mobile LCD backlight brightness and time (sec). Security settings SIM1 security 1、SIM1 security: You can make the security settings to prevent your phone or SIM card from unapproved use.
2、Change Password: change the passwords of PIN code, PIN2 code. *Note: Certain functions are network service. SIM2 security The same to the SIM1 security setup. Phonte secuity 1.Phone Lock: The phone lock can prevent your phone from unapproved use. Select Phone Lock to activate the protection of your phone. The phone will ask for the password next time it is turned on; press again to deactivate the protection.
1. Automatic: search automatically for the network to which the SIM card belongs to. 2. Manual: search for all available networks and register manually. Dual SIM settings Dual SIM open: open the dual SIM Only SIM1open: only open the SIM1 Only SIM2 open: only open the SIM2 Connectivity: Show SIM and account data. Restore Settings Reset to settings with the password of 1234 3.5 Facebook&palmchat&lifestyle These are the third party applications 3.
Use as: Select a picture as wallpaper Rename: rename the selected picture. Delete: delete the selected picture. Storage: change or choose a default storage path for the pictures Image information: You can view the details of the picture. Video recorder The phone is equipped with a video recorder. Enter into Video Recorder and press ok to start video recording. Video player Play the videos recorded by users or stored in the phone or in the memory card.
interface. Play: play the selected file. Details: For more information Refresh List: refresh song lists. Settings: set the playing of audio files. Sonud Recorder:record a new audio FM radio The phone supports FM broadcast. Select the FM shortcut to the relative actions. Press select key to do the following actions: Channel list: edit the name of the channel and display in the list Manual Input: directly input FM channel frequency, range from 87.5~108.0.
Move: move the files or folders to any position. Play: play audio or video files in current folder. Send: send current file via Bluetooth. Use as: use current photo file as wallpaper , Ringtones. Folder - Cool_Photo: the default storage path of camera - Cool_Video: the default storage path of e-book files videos - Cool_Music: the folder for uploaded audio files and the default reading path of the audio players 3.
Everyday: warn at the specified time every day. Custom: set the warning time of the alarm clock in a week. Alarm tone: Choose melody or select from file as the ring tone Alert type: the option ring tones are ring, vibration, vibration and ring. World clock: show most countries in the different time-zones. Calculator: Press the 0-9 ,#for the input of numbers and the +, – , x, ÷, Dot. Press the Right Soft Key to clear the last entry.
3.8 Profiles: General - Activate: activate the general profile - Customize: Enter into individual settings of the general profile. Functions are as follows: - Reset: restore settings Tone settings: change the ring tone for incoming calls, alarm clock, power on/off, message and keypad tone. - Volume: adjust the volume of ring tone and keypad tone. - Alert Type: ring only, vib.only, vib.and ring, vib. then ring. - Ring type: repeat or Beep once.
3.9 Services Internet service Homepage: log on to the homepage. The homepage is a WAP site you set in the connecting settings. If you haven’t set it, it will use the one set by the manufacturer. Bookmark: display the bookmarks available. Select it to connect to the website. Search or Input URL: enter any WAP website or other internet websites. Recent page: The history of page you browse Setting: make the setting of websites browsing. - Homepage: set the homepage.
Chapter 4 Input methods Input Methods General Introduction This phone provides input method such as Capital letter, Small letter, Numeric, . Functions allow the inputs of English characters include: Write and edit text message Write and edit names and numbers in the phonebook. Search for names of the numbers in the phonebook. Keypad Left Soft Key: is to confirm. Right Soft Key: is to clear a letter or back.
Edit Characters Entered: use the Left and Right Keys to move the cursor left and right, the Up and Down Keys to move the cursor up and down and the Right Soft Key to delete character. Change Input Method: in the status of text input, press the # Key to switch among the various input methods. Indication icons are shown at the top left corner of the screen. Input of Punctuation Marks: press * Key to call out the punctuation marks table.
9 WXYZwxyz9 0 Space 0 *Key Call out the punctuation marks #Key Switch among input methods Up Key Go up Down Key Go down Left Soft Key Go left Right Soft Key Go right End Key Return to standby The method of English input: Each key is designated with more than one letter. Press the key quickly until desired letter appears then input another after the cursor moves. Press 0 key to insert a space. Press Right Soft Key to clear wrong entry.
SIM card or contact the network supplier. PIN2 locked Enter the password and PUK2 code supplied with the SIM card or contact the network supplier. Call meter invalid The data transfer counter doesn’t work; please contact your network supplier. SIM card errors 1. The SIM card is dirty, clean it. 2. Reinstall the SIM card 3. The SIM card is damaged, change one. The Manufacture reserves the ultimate right for the interpretation of this manual.