Exploded diagram decomposition specification 1 3 5 7 9 11 13 15 17 19 21 23 CTP Assembly Front flash lamp shade Jack sealant rubber Front Camera Rear Camera Rear flash lamp shade Battery Cover Assembly trumpet every disk SPKER Small PCBA MIC Gum Cover Receiver 2 4 6 8 10 12 14 16 18 20 22 1 LCM Assembly Front Shell Assembly Seneor Silica Gel PCBA Back Shell Assembly Back Camera Lens Side Key Assembly Battery Coaxial Cable Vibration Motor Side Key Steel Disc
1 Taking care of your device Your device is a product of superior design & craftsmanship and should be handled with care: The following recommendations will help protect your phone: Keep the device dry. Precipitation, humidity, and all types of liquid or moisture may contain minerals that can rust electronic circuits. If your device gets wet, remove the battery and refrain from turning on device. Wipe it with a dry cloth and take it to the service center.
Licking the battery or charger is strictly prohibited; saliva is more corrosive than water. Residual saliva may short-circuit phone and damage its motherboard, causing the device to become inoperable; battery & charger may also be damaged in the process. WARNING: Licking USB plug or metallic battery component is strictly prohibited. Do not drop, knock, or shake device. Rough handling can disrupt internal circuit boards and fine mechanical parts.
Battery & charger safety Do not place battery in fire, explosion may occur. With concern for the environment, please abide local laws & ordinances in battery disposal. Only use original battery, charger, and accessories applicable to the specific mobile model. Failure to do so voids the warranty and may result in a hazard. Power off mobile prior to testing its charger. If charger malfunctions, off-mode will prevent damage to the motherboard.
2 Know your phone 1. 3. 5. 7. 9. 11. 13. Earphone plug Receiver USB port Front camera Volume button Light/proximity sensor V irtual button 2. 4. 6. 8. 10. 12.
3 SIM / SD card installation 1. Power off mobile. 2. Refer to the following picture for SIM / SD card installation.
4 Home screen Home screen showcases frequently used apps, you can also display ubiquitous information such as time, weather (third-party app required), date, etc.
5 Dialing Tap the phone icon to open call interface. Enter contact number via keypad to start a call. The keypad interface also enables functions such as texting and contact storage.
6 Notification & function toggle The notification screen displays new information & events; simply tap the notification to access its detailed content. The function-toggle screen lists commonly used functions and their virtual switches. Tap a switch to quickly turn a function on/off.
7 Messages The message function sends plain or multimedia texts to your friends. Tap a message to view its content. Tap the “Compose new message” button to start composing a message and send it to designated contact.
8 Camera The camera function captures your surroundings via the front or rear camera. Various types of white balance and photo fi lters are available to accommodate different lighting conditions.
9 My picture My picture can be used to browse images and photos from mobile or SD card storage; editing functions can be performed. Images can be designated as wallpaper or contact avatar. The sharing function allows images to be shared with friends via Bluetooth and MMS, etc.
10 Wi-Fi Enabling W i-F i grants access to local hotspots and allows you to browse Internet. Private networks will require a password.
11 Map “Google Maps” provides users with complete GPS & navigation services. It can display maps in terrain or terrain contour modes.
12 Boom player Boom player playlist displays all relevant fi les saved on the mobi le or SD card storage. You can play, pause, and switch between tracks through the music control panel. Volume control is accessed via side buttons.
13 PalmPlay PalmPlay is a virtual software store that offers commonly used apps. Simply tap an app to start downloading.
14 Factory data reset “Factory data reset” resets all configurations to their default state. Internal mobile storage is cleared of all data including apps, photos, music, videos, mail, contacts, etc. This procedure may take a long time. Please wait patiently for mobile to restart and do not power off. WARNING: Factory data reset as a last resort. Once activated all user data & configurations are deleted and cannot be restored.
15 SAR Specific Absorption Rate (SAR) Certification THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO WAVES Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves (radio frequency electromagnetic fields) recommended by international guidelines.
because, for purposes of system efficiency and to minimize interference on the network, the operating power of your mobile device is automatically decreased when full power is not needed for the call. The lower the power output of the device, the lower its SAR value. A body-worn SAR test has been performed on this device at a separation distance of 10 mm. To meet RF exposure guidelines during body-worn operation, the device must be positioned at least 10 mm away from the body.
16 Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. NOTE: This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.
separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.