User`s manual

11 INTRODUCTION
EVO RT UPS
EVO RT UPS (Uninterruptible Power Supplies) are the result of constant technological research
aimed at obtaining the best performance at the lowest cost.
EVO RT UPS are advanced ON-LINE UPS, single-phase, built specifically to protect your
computer from any irregularities in the AC line (for example blackouts, brownouts,
overvoltages, micro-interruptions) which often cause damage to hardware and software.
During a power failure, EVO RT continues supplying adequate AC power (with a true sinewave)
to all connected devices from the internal battery and by the DC/AC converter (Inverter).
Under normal AC line condition, EVO RT provides an automatic output voltage regulation from
the Rectifier and Inverter boards,and, filters out frequently occurring electrical disturbances
(high voltage transients, spikes, interferences, etc.), thus protecting all connected devices.
EVO RT protects all connected devices from accidental overload or Inverter fault through an
AUTOMATIC BYPASS that directly connects the AC input line with its outlets.
EVO RT is supplied with an RS-232 communication port and USB port, which can be used to
signal to a generic processor or computer the absence of mains supply or the end of battery
autonomy. This permits to carry out an automatic data saving operation during a long black out
with the most spread Operating Systems (Windows, Linux, Novell, etc).
Furthermore, the communication ports permit EVO RT to communicate with the computer,
transferring various measurements such as: input output voltage, battery voltage, output
power, frequency, and it can also be programmed for automatic operations such as switching
ON/OFF at a preset time.
WARNING
Please read this manual before using EVO RT. It contains important safety
information for the operator that will guide him to a correct use of the unit.
This manual is related to the below EVO RT models:
• EV0 1.0 RT
• EV0 2.0 RT
• EV0 3.0 RT
In this manual EVO RT will simply be called UPS.
EVO RT is in 19” RACK version (RT = Rack & Tower), it means that its sizes are compatible with
19” RACK cabinets and it has been designed to be included in the 19” RACK cabinets
EVO can even be used in TOWER position that is a vertical one, thanks to the relative and
reliable pedestals
EVO RT is constantly being developed and improved: consequently, your unit may differ
somewhat from the description contained in this manual.
In this manual EVO RT will simply be called UPS.
User’s manual 3 UPS EVO RT