User`s manual

UPS EVO DSP TT 19 User’s manual
“CONFIGURATION” MENU
DATE = "dd-mm-yyyy"
Shows system date in dd-mm-yyyy format (dd = day, mm = month,
yyyy = year).
Use ENTER, UP and DOWN keys to change the date.
TIME = "hh:mm:ss"
Shows system time in hh-mm-ss format (hh = hour, mm = minutes, ss =
seconds)
Use ENTER, UP and DOWN keys to change the time.
“EVENTS” MENU
EVENTS (xxx)
Shows last 380 events (alarms) of system. The total number of stored events is
xxx.
To look stored events, you must press ENTER key and then use UP/DOWN keys.
CLEAR EVENTS
Clears all events stored in EPROM after verification of clear process.
“EVENTS (xxx)” SUBMENU
YYY : AAAAAAAAAAAA
“YYY” shows progressive number of event and “AAAAAAAAAAAA” shows the
event name (for event names see “ALARMS” table on page 17).
The 001 event is the last stored event.
To look event details, you must press ENTER key and then use UP/DOWN keys.
DATE = dd/mm/yyyy
Displays date of event occurring.
TIME = hh:mm:ss
Displays time of event occurring.
A:XXXX-XXXX-XXXX
Displays alarm status when event occurs.
ST=XXXX-XXXXXXXX
Displays status string when event occurs.
“IDENTIFICATION” MENU
"X/X XXX kVA"
Shows number of Input/Output Phases and Output Nominal Apparent Power.
FW = "XX"
Shows Firmware version
4.1.4 Buzzer
Buzzer warns the user about the present alarms. It can be disabled by using the “COMMANDS” menu.
BUZZER
STATE DEFINITION
Off
No alarms
Discontinuous
A minor priority alarm is present
Steady
A major priority is present