User Manual

VTECH TELECOMMUNICATIONS LTD.
File :VT40-2421
MMI REV 4.doc
Date : 15 Nov, 2000 TITLE : INTERNAL PRODUCT SPECIFICATION
DOCUMENT NO.
VT40-2421 MMI REV NO.
4
PAGE
19 of 43
12. MAKING OUTSIDE LINE CALL
If trying to request a service from the 'busy' base unit which
all the paths are in use. You will get an audible warning tone.
1. Press an available [Lx], where x = 1/2/3/4. For example,
press [L2]. The LCD will display Fig. 29
2. For example, the telephone number is
035775141+PAUSE +2581"
3. Enter "035775141and then press [FUNCTION][7], then
the LCD will display Fig. 30
4. Then, enter "2581" & the LCD will display Fig. 31.
Some leading digits will be shifted away.
5. Press [END] to release the call, or put the handset to the
charger to release the call automatically. The screen will
return to idle mode as Fig.1a
13. ANSWERING CALL
You may press any one of the digit keys
[1/2/3/4/5/6/7/8/9/0/*/#] to pick up the ringing call, and the
answer priority is Ringing Intercom Call, Transfer Calls, Hold
Recall Calls, Ringing CO Line Calls. But, you may override
the priority, by press the [Lx] or [ICM] directly.
1. Handset in the standby mode when the handset rings (eg.
Co line 2), the caller ID will be displayed. (refer to
Fig.32)
2. Press [any one of the digit] key, or you may press the
ringing [Lx] to pick up the CO ringing line, the LCD will
display as Fig. 33.
3. Press [END] to release the call, or put the handset to the
charger to release the call automatically. The screen will
return to idle mode as Fig.1a
LINE 2 mm:ss
%2
Fig.29
LINE 2 mm:ss
035775141P
%2
Fig.30
LINE 2 mm:ss
035775141P2581
%
2
Fig.31
0
TONY KENT
12345678901
L2 9/02 11:09
AM
%
Fig.32
LINE 2 mm:ss
%2
Fig.33