User Manual

VTECH TELECOMMUNICATIONS LTD.

File :VT40-2421

MMI REV 4.doc

Date : 15 Nov, 2000 TITLE : INTERNAL PRODUCT SPECIFICATION

DOCUMENT NO.

VT40-2421 MMI REV NO.

PAGE

30 of 43

32. COMPLETE WITH SPEAKERPHONE

The speakerphone function frees your hands so you can keep

working, too.

Press the [SPEAKER] key to turn on the speakerphone

function when you are using the handset unit. The voice will

be switched to the speakerphone.

If the user wants to come back handset mode. Press

[SPEAKERPHONE] again to switch the voice to the handset

automatically.

Note: If the headset unit has plugged in the handset, the

speakerphone would not work.

33. VOLUME CONTROL

Adjusting the handset/speaker/headset volume level

While using the handset or speaker or handset, the user may

adjust the volume level of pressing [s]/[t] and the LCD will

show Fig.73 for 3 seconds after the volume is set.

There are 5 receiver volume levels (Level 1,2,3,4,5). The

default level is middle (Level 3).

.A warning beep will be heard when the volume is set at the

maximum (Level 5) and minimum level (Level 1)

Adjusting the Ringe r volume

1. While the telephone is idle (not being used), the user may

adjust the ringer volume level by pressing [s]/[t] key.

2 The LCD will automatically show “RINGER:HIGH” or

“RINGER: MID” or “RINGER: LOW” . For example, if the

user increases the ringe r volume from ringer low to ringer

high, the display will show Fig. 74 for 3 seconds. Then, the

display will return to idle mode as Fig. 1a.

There are 3 ringer volume levels (Low/Mid/High). The

default level is middle.

LINE 2 mm:ss

VOLUME 

Fig.73

HANDSET 11

RINGER:HIGH

Fig.74