User Manual

VTECH TELECOMMUNICATIONS LTD.
File :VT40-2421
MMI REV 4.doc
Date : 15 Nov, 2000 TITLE : INTERNAL PRODUCT SPECIFICATION
DOCUMENT NO.
VT40-2421 MMI REV NO.
4
PAGE
32 of 43
8 for T, U, V, t, u, v, 8
9 for W, X, Y, Z, w, x, y, z, 9
0 for 0, “SPACE”
* for *
# for #
Reviewing the information from speed dialing memory
1. User could review the speed dialing memory by repeating
the above step 1 to step 5.
Dialing information from speed dialing memory
1. User could review the speed dialing memory by repeating
the above step 1 to step 4.
2. Press an available [Lx], where x = 1/2/3/4, handset will
automatically pick up the CO line and dial out the
number.
Dialing Information after pick up the line
1. Press an available [Lx], where x = 1/2/3/4, handset will
automatically pick up the CO line and shows Fig. 64.
2. Press [MEM] to enter the programming mode.
Enter speed dialing memory index (01-20), for example”12”,
it will automatically dial out the content in the memory index
12 and the LCD will display Fig.71(eg. memory no. is
03577971*96)
Fig.77b
TONY KENT
1367225678 M05
Fig.78
PROGRAMMING
SUCCESSFUL!