User's Manual

Manual Ver1.0
4. Quick Setup
The system administrator can configure AW4038 remotely or locally via a Web
Browser. Network configuration needs to be planned and decided before starting the
configuration procedure.
Quick Setup allows system administrator to select the appropriate operation mode and
configure the corresponding settings step by step to create a connection. The following
five operation modes are supported:
z PPP over Ethernet (PPPoE)
z IP over ATM (IPoA)
z Bridging
z MAC Encapsulation Routing (MER)
z PPP over ATM (PPPoA)
4.1 PPP over Ethernet (PPPoE) Configuration
Click on “Quick Setup” in the left frame, and follow the steps below to create a PPP
over Ethernet (PPPoE) connection.
4.1.1 ATM PVC Configuration
Figure 4. Quick Setup – ATM PVC Configuration
-10-