User Manual

- 3 -
Connecting the Hardware
WA RN IN G
Before you begin, turn the power off for all devices.
These include your computer(s), your LAN hub/switch (if
applicable), and the AW4042U.
The layout of the ports on your device may vary from the layout shown. Refer to the steps that follow for
specific instructions.
Figure 1.3. Overview of Hardware Connections
2. Login to AW4042U through web browser
I. Configure your PC IP address as 192.168.1.x within the same subnet as AW4042U (AW4042U default IP is 192.168.1.1)
and subnet mask (default is 255.255.255.0).
II. Connect AW4042U with PC through an Ethernet cable.
a. Turn on the power of AW4042U to establish ADSL link.
b. Enter the IP address (default is 192.168.1.1) of AW4042U from Web Browser. Login Dialog Box will pop up
as following: