User Manual

Chapter 3: TECOM Bluetooth Module BT3010 UART Firmware Download

Chapter 3: TECOM Bluetooth Module BT3010

UART Firmware Download

Firmware Download Procedure

1. The TECOM Bluetooth Module BT3010 UART Interface Evaluation Board should be

powered up by 5V AC Adapter and plugged into your PC’s COM port prior to

downloading the firmware.

2. Please find the directory of CD-Rom which contains the firmware, you will find three files

in the directory,

- BroadcomDownload.exe : firmware download program

- BBTMD_2_2_040(UART Loader 115200).hex : Downloader script for UART

interface

BBTFW_2_1_003(UART).hex : firmware script for UART interface

3. Double click on BroadcomDownload.exe to start the program; in the “Mini Driver” box,

select “Serial” and select a serial port “COM1”. (as Figure 3)

Figure 3: Downloader Configuration for UART Interface

4. Then click on “Choose Mini Driver File” to select the appropriate mini-driver. For UART

interface, the user shall select “BBTMD_2_2_040(UART Loader 115200).hex” in the

“Firmware” directory.