User's Manual

16
established between the two devices, the client can use the server’s modem as if it were a local
device on the client.
Connection is initiated from the Client. To establish a Dial-up Networking session:
1. On the
Client
, open
My Bluetooth Places
by double-clicking the
icon on your desktop.
2. Select Entire Bluetooth Neighborhood.
3. Right-click anywhere except on a device name and then select
Refresh from the pop-up menu for an updated list.
4. Right-click the server that will provide the Dial-up Networking
Service and select
Discover Available Services
from the pop-up
menu to display an updated list of available services.
5. In My Bluetooth Places, double-click Dial-up Networking.
6. The Connect To dialog box opens, prompting you to fill in your
user name, password, and the phone number to be dialed.
7. Click the
Dial
button. Selecting the
Save password
checkbox will
let you connect to the same number in the future without having
to type in all the connecting information.
You can now open a Web browser and connect to the Internet as if the modem was attached to
your computer.
To close a Dial-up Networking connection:
1. On the Client, open My Bluetooth Places by double-clicking the
icon on your desktop.
2. Select the device that is providing the Dial-up Networking service.
3. Right-click Dial-up Networking and then select Disconnect Dial-
up Networking
from the pop-up menu.
Fax
The Fax service allows a Bluetooth client to perform a wireless fax transmission using a device
that is physically attached to a Bluetooth server.
Connection is initiated from the Client. To send a fax:
1. On the Client, open My Bluetooth Places by double-clicking the
icon on your desktop.
2. Select Enter Bluetooth Neighborhood.
3. Right-click anywhere except on a device name and select
Refresh from the pop-up menu to see an updated list.
4. Right-click the server that will provide the Fax service and then
select Discover Available Services to display an updated list of
services.
5. Double-click Fax.