User's Manual

©2002 by TECOM CO., LTD. All rights reserved.
26
 LMP Sub Version: the sub-version number of the Bluetooth
Specification that the Link Manager Protocol (LMP) complies with.
Advanced:
 Advanced: this button displays the Advanced Settings dialog box,
allowing you to select the country code and transmission power
settings.
Note: This option is not available on all systems.
Hardware Tab – Advanced Settings dialog box
As mentioned in the previous section, the Advanced Settings dialog box is not always available.
Depending on the country where the hardware is sold and/or where it will be used, you may or
may not have the
Advanced
button in the
Hardware
tab of your Configuration Panel.
However, if you do have the Advanced button in the Hardware tab, click the button to open the
Advanced Settings dialog box.
From this dialog box, you can set the following properties:
 Country Code
− North America, Europe (except France), and Japan
−
France and China
 Maximum Transmission Power
− High
−
Medium
− Low
Once you’re done, click the Apply button to implement the changes. A dialog box appears with a
notification, prompting you to reset the Bluetooth device attached to this computer before any
changes will take effect.
Click Cancel to save the changes – the changes will be applied the next time you restart your
Bluetooth device.
Additional option for Windows XP users:
Click the Yes button to reset the Bluetooth device now—all open Bluetooth connections will be
closed.
Information Exchange Tab
The
Information Exchange
tab allows you to change the settings of the following:
 My Shared Directory: the highest-level directory on this
computer that a remote device has permission to access.