User's Manual

Bluetooth Headset User Manual (BT3061a)
1. Getting Started
Charge the headset using the adapter. It takes 2 to 2.5 hours to fully recharge the
battery
2. Pairing
Press and hold the ON/OFF button until you hear two short low tones.
The headset indicator light flashes green and red, indicating the pairing mode is
on.
The default ID Code is “1111”.
3. Turn the headset on
Press and hold the ON/OFF button until you hear a short tone.
The headset indicator light flashes green, indicating the pairing mode is on. If the
battery is low, the light flashes red.
4. Turn the headset off
Press and hold the button key until you hear a short low tone following a short
high tone.
The headset indicator light is switched off.
5. Adjusting the volume
To increase the volume, press the “+” button
To decrease the volume, press the “-“ button
6. Making a call
Enter the number on the mobile keypad.
When the call has been set up, the voice will be transferred to headset.
End the call by pressing the ON/OFF button.
7. Answering calls
When the headset rings, press the ON/OFF button.
End the call by pressing the ON/OFF button.