. BT3080 User Manual
TABLE OF CONTENTS SECTION PAGE 1. General description Page 1 2. Typical applications Page 1 3. General Specifications Page 2 4. User Interface Page 3 5. Electrical specifications Page 6 6.
Page-1- 1. GENERAL DESCRIPTION BT-3080 Bluetooth universal headphone supports 4 Bluetooth profiles and they are: f BT-3080 supports headset and hand-free profiles to work as a wireless headset with mobile phones or VOIP to manage phone call. f BT-3080 supports advanced audio distribution profile (A2DP) to work as a wireless headphone with MP3 phones, MP3 players or computers. f BT-3080 supports audio video remote control profile (AVRCP) to work as a wireless remote control.
3. General Specifications Bluetooth Standard: Range: Listen Time: Talk Time: Stand-by Time: Speaker: Battery type: Charge Others: Dimension Bluetooth V2.0 Qualified Up to 10 meters (66 feet) in open space Continuous music play time (A2DP) up to 10 hours Continuous talk time (hand-free, headset) up to 12 hours Up to 250 hours 27 mm Neodymium 250 mAh Lithium Polymer 2.
4. USER INTERFACE Figure 4.1 Left Ear User Interface 1. Play/Pause/Call Multiple Function Button 2. Bluetooth Status Blue LED 3. Next/Previous button 4. Microphone Boom Figure 4.2 Right Ear User Interface 1. On/Off switch 2. Mini USB port for charging and firmware upgrade 3.
TABLE 4.1 BT3080 USER INTERFACE Placement Description Abbreviation Button Right ear Power On/Off Button Power Forward Button Next Backward Button Prev Multi-functions :Pairing/ Play/ Pause/ Stop/ Call Answer/ Call End MF Vol+ Button Vol+ Vol- Button Vol- LED Right ear Charging Indicator O (Orange) Left ear Red LED: Mute/ Low battery/ Pairing R (Red) Blue LED: Power on/ Mono or Stereo active B (Blue) TABLE 4.
Page-5- TABLE 4.3 BT3080 PHONE CALL MMI Function Action Button Turn on HS Switch to ON Power Turn off HS Switch to Off Power Activate pairing 5s Hold MF Call answer One press MF Call reject 1s Hold MF Call end One press MF Outgoing call cancel 1s Hold MF Volume up One press Vol+ Volume down One press Vol- Mute – microphone 2s Hold Vol+ and Vol- Initiate last dialed call 1s Hold Next Initiate last received call 1s Hold Pre TABLE 4.
Page-6- 5. ELECTRICAL SPECIFICATIONS TABLE 5.1 BT3080 POWER CONSUMPTION Mode Average Unit Standby 0.8 mA Inquire scan, 1.28 sec. interval 18 mA Page scan, 1.28 sec. interval 20 mA ACL connection, sniff mode, 40 ms interval 0.8 mA SCO connection (Mono) 22 mA Streaming music @ 44.1KHz sample rate (Stereo) 25 mA TABLE 5.2 BT3080 BATTERY LIFE MODE LIFE Battery Type Lithium Polymer Battery Capacity 250 mAh Charging Current 125 mAh Charging Time 2.
Page-7- TABLE 5.3 BT3080 RF Specifications Description Min. Typ Max. Unit Frequency specification Frequency range Modulation characteristics Δf1 (ave) Δf2 (max) Δf1 (ave)/ Δf2 (ave) Initial carrier frequency accuracy Carrier frequency drift One slot packet Five slot packet Max drift rate (KHz/ 50us) 2402 140 115 0.
Page-8- 6. ACOUSTICS SPECIFICATIONS SPEAKER TYPE Size 27 mm Neodymium SPEAKER FREQUENCY RESPONSE Telephony Stereo Audio Distortion 300 Hz to 4 kHz (CVSD u-Law) 20 Hz to 20 kHz (16 bit 48kHz SBC Coding) <3% This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
