User's Manual

Installation and Operations Manual
AT&T Proprietary (Internal Use Only)
—90—
3. Affix the base to the desired location utilizing the three (3) long mounting screws
and anchors supplied with the unit.
NOTE: For wall mounting the test button should be oriented down nearest the floor.
4. When attaching the detector to the base, match the alignment marks and twist
clockwise, as shown in Figure 57:
Figure 57: Mounting Glass Break Detector—Step 2
NOTE: If the batteries are not installed, the detector cannot be installed to its base.
CAUTION: Make sure that the distance from the glass to be protected and the glass
break detector does not exceed fifteen (15) feet.