User's Manual

Installation and Operations Manual
AT&T Proprietary (Internal Use Only)
—129—
7.1.2 Not Ready to Arm
The system is not ready to arm because one, or more, of the supervised devices is not
in the closed state. The keypad will display the number of devices that are not in the
closed state, as shown in Figure 81.
Figure 81: Keypad – Number of Open State Devices
Afterwards the keypad will display the name of the open state device(s) and cycle
through the device list. Each open state device will display on a separate line, as shown
in Figure 82 and Figure 83.
Figure 82: Keypad – List of Open State Devices (Bedroom Window)
Figure 83: Keypad - List of Open State Devices (Kitchen Door)