User's Manual

Installation and Operations Manual
AT&T Proprietary (Internal Use Only)
—132—
7.1.5 Arming the System─BYPASS
When arming the system for STAY or AWAY, you may get a message indicating that the
system cannot arm because a sensor(s) is in an opened state, such as a window and/or
door, as shown in Figure 88 . You may close the open sensor(s) before arming or utilize
the BYPASS feature.
Figure 88: Keypad – Number of Open State Devices
The LCD will display “Press BYPASS to Proceed”, as shown in Figure 89.
Figure 89: Keypad - BYPASS
The identity of the open sensor(s) will appear in the LCD display, as shown in Figure 90.
Figure 90: Keypad – Example: Bedroom Window Open