User's Manual

Installation and Operations Manual
AT&T Proprietary (Internal Use Only)
—134—
7.1.6 Disarming the System – Entry Delay
When the system is in the Armed-AWAY or Armed-STAY mode and you enter the
residence through a designated entry/exit door, the system generates an entry delay and
the keypad begins chirping. The entry delay allows you to get to the keypad and enter
your code before the system sounds an alarm. The keypad chirps slowly for during the
entry delay and then chirps fast for the last ten (10) seconds and the LCD displays
“Alarm – Enter Code to Cancel,” as shown in Figure 93.
Figure 93: Keypad - Entry Delay, Alarm Enter Code to Cancel
After you enter the four (4) digit Security Code, the LCD will display “Ready to Arm.”
(See Figure 94.)
Figure 94: Ready to Arm