User's Manual

Installation and Operations Manual
AT&T Proprietary (Internal Use Only)
—41—
Action
Illustration
5. Go to each remaining location where you want to establish a network connection,
and connect an HPAV Device to an available power outlet.
NOTE: Each time you plug in a subsequent HPAV Device, ensure that the Power
and PLC LEDs turn solid green. When you plug the Ethernet device into the HPAV
device, the Ethernet LED will turn green, and then blink green to indicate activity.
5.1.2 Connecting the AC-to-AC Adapter with Integrated HPAV to the DLC Cabinet
Follow these steps to connect the AC-to-AC Adapter with integrated HPAV to the DLC
Cabinet:
Action
Illustration
1. Unplug the power cord
2. Connect the low-voltage wires
to the terminals on the back of
the adapter.
3. Connect the opposite end of the
low-voltage wires to the
terminals on the power supply in
the DLC Cabinet
4. Plug a Cat5/Ethernet cable into
the back of the adapter.
5. Plug the other end of the
Cat5/Ethernet cable into the
WAN port in the DLC Cabinet.
6. Mount the adapter to the wall.
7. Plug the adapter power cord
into an AC wall outlet.