User's Manual

Installation and Operations Manual
AT&T Proprietary (Internal Use Only)
—44—
5.3 Mounting the DLC Cabinet
After you have located the best place to mount the DLC cabinet, you may mount the
DLC Cabinet to either a sheetrock wall or open wall.
5.3.1 DLC Cabinet Installation on a Sheetrock Wall
Follow these instructions to install the DLC Cabinet on a sheetrock wall:
STEP 1. Install the wall plate on the sheetrock wall.
Action
Using the holes on the wall plate as a template, mark the four (4) mounting holes with
a pencil and pre-drill starter holes using an appropriate size masonry/wood bit. Use
four (4) screws to mount the plate to a sheetrock wall by screwing into a wall stud for
support, as shown in Figure 28.
NOTE: At least one (1) pair of screws should be on a stud, if at all possible. Use the
corner holes of the plate when you are able to screw into a stud.
Figure 28: Wall Plate Installation