IG7200 Smart Phone Gateway Quick Installation Guide -1-
What’s in the Box -1-
Connection Type A LINE MODEM PHONE 1. Plug “Power Adaptor”, set switch to ON (IG7200 will be ready for use after two minutes.) 2. Connect the “PHONE＂port of the ADSL splitter to the “LINE＂port of IG7200. 3. Connect the “WAN＂ port of IG7200 to Ethernet port of xDSL Modem. 4. Connect the “LAN＂ port of IG7200 to Ethernet port of your PC if needed.
Connection Type B DSL PHONE 1. Plug “Power Adaptor”, set switch to ON (IG7200 will be ready for use after two minutes.) 2. Connect the “PHONE”port of the xDSL Modem to the “LINE”port of IG7200. 3. Connect the “WAN” port of IG7200 to Ethernet port of xDSL Modem. 4. Connect the “LAN” port of IG7200 to Ethernet port of your PC if needed.
Connection Type C Coaxial Cable PHONE 1. Plug “Power Adaptor”, set switch to ON (IG7200 will be ready for use after two minutes.) 2. Connect the wall phone jack to the “LINE” port of IG7200. 3. Connect the “WAN” port of IG7200 to Ethernet port of Cable Modem. 4. Connect the “LAN” port of IG7200 to Ethernet port of your PC if needed.
Download IP3051 Android smart phone press ”Play Store” search ”IP3051” press ”IP3051” ”Download” “Accept & download” “KEEP SHOPPING” “Installing” back to home page of smart phone press “All apps” find “IP3051” in the list. (Figure 1) (Figure 1) Smart phone (IP3051) auto pairing with IG7200 Step 1: Smart phone Wi-Fi access thru.
(Figure 2) Step 2: IP3051 detect IG7200 automatically： press “Home page” key on smart phone press ”All apps” select “IP3051” the screen shows ”Searching for Gateway, please wait…”.
Step 3 : Screen shows ”Gateway detected” ”OK”。 (Figure 4) (If the screen shows “No Gateway is detected.” (Figure 5) press ”Cancel” back to step 1 to do again.
Step 5 : Press button which is on the top of IG7200 (WLAN LED will flash with red and blue at this moment.) press “Starting” on IP3051. (Figure 7) (Figure 7) Step 6: Screen shows ”IP3051 Registering…”.
Step 7 : Registration Successful. (Figure 9) (Figure 9) IG7200 WAN IP Settings (Optional) Step 1 : Press “Menu” key on smart phone during IP3051’s screen ”Settings”.
Input ”admin1234” (Username) and “123456” (Password) press ”Login”. (Figure 12) (Figure 11) (Figure 12) Step 3 : Press ”WAN IP Setting”. (Figure 13) (Figure 13) Step 4 : Press ”Network Type”.
(Figure 14) -11-
Step 5 : Choose the network type for your xDSL/Cable Modem ： ”DHCP”, ”Static IP” or “PPPoE”. (Figure 15) (If you don’t know what network type of your network is, please check it with your ISP (Internet Service Provider).) ”Static IP” for ADSL Static IP ； “PPPoE＂ for ADSL Dynamic IP；＂DHCP＂ for Cable Modem，enter the data as below： a. Static IP ： Input “IP Address”, “Subnet Mask”, “Default Gateway” and “DNS 1” . b. PPPoE ： Input ”PPPoE Username” and “PPPoE Password”. c. DHCP：No need to input data.
IG7200 Wi-Fi settings (Optional) If you need to change the Wi-Fi settings or password, please follow the steps below： Step 1: IP3051’s screen press ”Menu” key on smart phone ”Settings”. (Figure 16) (Figure 16) Step 2 : Press ”Gateway Settings” (Figure 17) Input ”admin1234” (Username) and “123456” (Password) press ”Login”. (Figure 18) (Figure 17) (Figure 18) Step 3 : Press ＂Wi-Fi Security Setting＂.
(Figure 19) Step 4 : Press ”Type”. (Figure 20) (Figure 20) Step 5 : Choose one security mode (Suggest to choose “ WPA-PSK” mode).
(Figure 21) Step 6 : Press ＂Password＂ and key in the Wi-Fi password. (Figure 22) (Figure 22) Step 7 : Press ＂OK＂ ， IG7200 Wi-Fi password is changed immediately. (Remember to change the Wi-Fi settings on smart phone to re-connect IG7200.) Congratulations!! Setup is complete, you can use IG7200 now.
At any time, you can check the upper left corner of the IP3051 icon. If the blue, device is the "successful registration"! After finishing IG7200 installation and IP3051＇s registration, you can make call thru “Keypad＂, “Contact List＂ and “Call Log＂. You can make free calls between IP3051s and receive / make call thru the PSTN line which connected to IG7200 everywhere. No doubt, you can save the roaming fee when you go abroad.
**Note：** 3G phone will disable the roaming feature for data in general, to avoid the roaming bill, please make sure the roaming feature for data is disabled when you go abroad. (Settings Mobile network Off)，use the local free Wi-Fi network to save the cost.
Download IP3051 iphone press ”App Store” search ”IP3051” press ”IP3051” ”FREE” “INSTALL APP” “INSTALLING” back to home page of iphone find “IP3051” in the list. (Figure 23) (Figure 23) iphone (IP3051) auto pairing with IG7200 Step 1: iphone Wi-Fi access thru. IG7200： use iphone and press “Settings” “Wi-Fi” turn on “Wi-Fi” press ”7200_XXXXXX” (“XXXXXX” is the last 6 digits of MAC address which is labeled under the stand of IG7200.) Wi-Fi connection finished.
(Figure 24) Step 2: IP3051 detect IG7200 automatically： press “Home page” key on iphone select “IP3051” the screen shows ”Searching for Gateway, please wait…”.
Step 3 : Screen shows ”Gateway detected” ”Next”。(Figure 26) (If the screen shows “No Gateway is detected.” (Figure 27) press “Home page” key on iphone back to step 1 to do again.
Step 5 : Press button which is on the top of IG7200 (WLAN LED will flash with red and blue at this moment.) press “Start Registration” on IP3051. (Figure 29) (Figure 29) Step 6: Screen shows ” Registering…”.
Step 7 : Registration Successful. (Figure 31) (Figure 31) IG7200 WAN IP Settings (Optional) Step 1 : Press “Setup” button on IP3051 ” Gateway Settings”.
Step 2 : Input ”admin1234” (Username) and “123456” (Password) press ”Login”. (Figure 33) (Figure 33) Step 3 : Press ”WAN IP Setting”.
Step 4 : Press ”Network Type”.
Step 5 : Choose the network type for your xDSL/Cable Modem ： ”DHCP”, ”Static IP” or “PPPoE”. (Figure 36) (If you don’t know what network type of your network is, please check it with your ISP (Internet Service Provider).) ”Static IP” for ADSL Static IP ； “PPPoE＂ for ADSL Dynamic IP；＂DHCP＂ for Cable Modem，enter the data as below： a. Static IP ： Input “IP Address”, “Subnet Mask”, “Default Gateway” and “DNS 1” . b. PPPoE ： Input ”PPPoE Username” and “PPPoE Password”. c. DHCP：No need to input data.
IG7200 Wi-Fi settings (Optional) If you need to change the Wi-Fi settings or password, please follow the steps below： Step 1: Press “Setup” button on IP3051 ” Gateway Settings”. (Figure 37) (Figure 37) Step 2 : Input ”admin1234” (Username) and “123456” (Password) press ”Login”.
Step 3 : Press ＂Wi-Fi Security Setting＂. (Figure 39) (Figure 39) Step 4 : Press ”Type”. (Figure 40) (Figure 40) Step 5 : Choose one security mode (Suggest to choose “ WPA-PSK” mode).
(Figure 41) Step 6 : Press ＂Password＂ and key in the Wi-Fi password.
Step 7 : Press ＂Done＂，IG7200 Wi-Fi password is changed immediately. (Remember to change the Wi-Fi settings on smart phone to re-connect IG7200.) Congratulations!! Setup is complete, you can use IG7200 now. At any time, you can check the registration icon of the IP3051. If the blue, device is the "successful registration"! After finishing IG7200 installation and IP3051＇s registration, you can make call thru “Keypad＂, “Contact List＂ and “Call Log＂.
**Note：** iphone will disable the roaming feature for data in general, to avoid the roaming bill, please make sure the roaming feature for data is disabled when you go abroad. (Settings General Cellular Data Roaming OFF)，use the local free Wi-Fi network to save the cost.
Please remember to enable the following items in iphone. iphone “Settings” “Notifications” “IP3051” “Notification Center” “ON” (To avoid IP3051 stop running.
Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details. The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0).
-34-
