Preliminary Feature Operation for Casio 2-Line Cordless Phone with Caller ID (MHS-2), And Casio 1-Line Cordless Phone with Caller ID (MHS-5) Revision: 0.3 Date: Mar. 31, 2000 Author: Frank Yang-Hsin LIN Reviewed: Approved: Copy To: TECOM CO., LTD 23, R&D Road 2 Science-Based Industrial Park Hsin-Chu Taiwan R.O.C.
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:1/73 Version and Amendment Records Version # Description Date 0.01 1. Preliminary Operation Manual Jan. 27, 2000 0.02 1. Modify the mistakes and add the MHS-2 function Feb. 24, 2000 0.3 1. Modify the programming item Mar.
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:2/73 TABLES OF CONTENT I. INTRODUCTION...........................................................................................................................7 1. Becoming Familiar with Your Wireless System .............................................................................................................. 7 2. The Features .............
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:3/73 10. Hold Reminder Time Programming ............................................................................................................................. 22 11. FLASH Time Programming .......................................................................................................................................... 23 12.
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:4/73 14.1 Setting DND Mode.................................................................................................................................................... 36 14.2 Canceling the DND Mode. ........................................................................................................................................ 36 15.
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:5/73 1. Storing the Information into Directory .......................................................................................................................... 46 2. Reviewing the Information from Directory ................................................................................................................... 47 3.
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:6/73 2. LCD Icon for Caller ID Function ................................................................................................................................... 68 3. Ringing Line Caller ID Function .................................................................................................................................... 68 3.
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:7/73 I. INTRODUCTION 1. Becoming Familiar with Your Wireless System The system consists of one base unit and up to sixty wireless handsets. The base unit provides four voice (RF) channels for Intercom or outside calling by any wireless handset. 2. The Features The system provides many features such as: 2 CO line Capacity.
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:8/73 II. INDICATIONS 1. Lamp Cadence Dark solid dark Lit solid lit Slowest 1sec off, 1sec on repeatedly. Slow 0.5sec off, 0.5sec on repeatedly. Fast 0.125sec off, 0.125sec on, repeatedly. Flick1 0.125sec off, 1.875sec on, repeatedly. Flick2 0.125sec off, 0.125sec on, 0.125sec off, 1.625sec on, repeatedly. Flick3 0.125sec off, 0.
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:9/73 Flick1: Base unit is in use the intercom trunk. Lit: Handset units are in use the intercom trunk. Speaker LED Dark: Idle mode. Lit: Speakerphone mode. Headset LED Dark: Idle mode. Lit: Headset mode. Line1/Line2 Red LEDs Dark: CO line is idle. Slow: CO line is ringing. Fast: Handset unit user holds the CO line.
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:10/73 III. PROGRAMMING ( HANDSET UNIT ONLY) 1. Summary of the Programming and Function Codes 1.1 Programming Codes There are some programming parameters on the handset, and here are the operation and the list. . Standby, the LCD displays: R i n I D : < Note: g 1 i 1. "Ring": 2. "ID": 3.
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:11/73 2. Programming the System Security Code on the Handset . Standby, press [PRG] and the LCD displays: M E M < i c o n s > . Press [s]/[t] to select the item to set the system security code S e c . C o ( E m p t y < i c o Or S e c . C o 1 2 3 4 5 6 < i c o 1. MEM : 2. Sec.Code : 3. (Empty) : 4.
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:12/73 You may program each the CO line incoming call will ring or not on your handset. Default all the 2 CO lines will ring. . Standby, press [PRG]. . Press [s]/[t] to select the item to select the line you want to program, say CO1 L 1 O n < or L 1 O f f < R i i c R i i c n ( o g # n : s c > h g ) n ( o g # n : s c > h g ) 1.
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:13/73 . Press [s]/[t] to select the FLASH Time programming mode. The LCD will display: F 6 l 0 a s h 0 m s < i c T # n ( o 1. Flash Time : 2. 0.6 Sec. : i m e : c h s > g ) Flash time programming mode Programmed FLASH time .
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:14/73 1. Hold Remind : 2. 30 Sec. : Hold Reminder Time programming mode Programmed Reminder Time. . Press [#] to select the Hold Reminder Time setting. For example, disable the function of Hold Reminder. The LCD will display: H o O f l f < d i R e m i ( # : c c o n s > n h d g ) .
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 L O i f or L i O n Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:15/73 n f < e n e < i i e # n l : s e c > c h t g ) c S ( o e # n l : s e c > c h t g ) c S ( o 1. Line Select: 2. Off/On : You are programming the Auto Line Select function On/Off. Disable/Enable Auto answer. .
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:16/73 . Press [#] to toggle the Selection. The LCD will display: F i L 2 or F i L 1 r s t < i c r s t < i c ( o L # n i : s n c > e h g ) ( o L # n i : s n c > e h g ) 1. First Line : 2. Off/On : You are programming the First Line function. Disable/Enable CO1 ring. .
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:17/73 M E M O K ! R e s e t < i c o n 1. MEM OK! : 2. Reset: s > Programming end & OK prompt. Reset programming mode prompt. .
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:18/73 IV. PROGRAMMING ( MHS-2 BASE UNIT ONLY) 1. Summary of the Programming There are some programming parameters on the base unit, and here are the operation and the list. . Press [PROGRAM] and then enter the programming items. Rotate the Data Dial to select the item you want to change 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15.
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:19/73 . Rotate the Data Dial to select the item to set the system security code L 1 R O n or L 1 R O f f i n g i n g 1. L1 Ring : 2. On/Off : You are programming CO line#1 ring On/Off. The current setting is On/Off. . Press the center of the Data Dial to select this option . Rotate the dial to select either ON or Off.
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 L I U O f Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:20/73 D e t e c t f 1. LIU Detect : 2. On/Off : You are programming the LIU function On/Off. The current setting is On/Off. . Press the center of the Data Dial to select this option . Rotate the dial to select from the LIU function On/Off status. The LCD will display: L I U D e < O f f > or L I U D e < O n > 1. LIU Detect : 2.
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 O f Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:21/73 f 1. Privacy : 2. On/Off : You are programming the Privacy function On/Off. The current setting is On/Off. . Press the center of the Data Dial to select this option . Rotate the dial to change the selection. The LCD will display: P r i < O f or P r i < O n v f a > c y v > a c y 1. Privacy : 2.
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 < 2 0 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:22/73 0 1 > 0 1 / 0 1 . Press the center of the Data Dial to select the year. . And rotate the dial to select the month option. . Press the center of the Data Dial to select this option. . Rotate the dial to change the month. The LCD will display: Y e 2 a 0 r & D a 0 1 < 1 t 2 e > / 0 1 .
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:23/73 11. FLASH Time Programming You may program the FLASH time duration as your service need. . Standby, press [PROGRAM] . Rotate the Data Dial to select the FLASH Time programming mode. The LCD will display: F l 6 a 0 s 0 h T m s 1. Flash Time : 2. 0.6 ms. : i m e Flash time programming mode Programmed FLASH time .
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:24/73 1. Ring Level : 2. Hi : Ringer Level. Ringer level is Hi . Press the center of the Data Dial to accept. 14. Base Reset programming You may RESET the handset and clear all the programmed data, all the parameters will back to the default values.
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:25/73 V. INSTALLATION ( MHS-5 ONLY ) 1. Configuration The system consists of a base unit and wireless handsets. The base unit provides 4 voice (RF) channels for Intercom or outside calls. 2. System Security Code Programming The S.S.C. (System Security Code) prevents your cordless system from being used by other cordless telephone users. .
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:26/73 VI. BASIC OPERATION ( HANDSET UNIT ONLY ) 1. Standby Mode The handset will automatically be in the battery saver mode, when the handset in standby mode. 1.1 Handset Link with the "Idle" Base Unit R i n I D : < g 1 i 1."Ring": 2."ID": 3.: : L o w 2 c o n s > Ringer volume that may be Low, Mid, Hi or DND.
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:27/73 2."ID" : 3. Busy : 4. : Identification Number of the handset. The voice channels of the Base Unit are busy. Icons for the status of CO lines, and battery. 2.1 Making An Outgoing Call by Manual Dialing . Standby . Press an available [ Lx ], where x = 1/2. For example, press [L2]. The LCD displays: L 2 m m : < I c o 1. L2 : 1.
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:28/73 to pick up the CO ringing line, the LCD will display (For example, if you pick up Line 2) L 2 m m : < i c o n s s s > . If you want to release the call, press [OFF]. The LCD will return to the idle status.: R i n I D : < g 1 i : L o w 2 c o n s > 4. Last Number Redial (LNR) 4.1 Making An Outgoing Call by LNR .Standby : .
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:29/73 5. Placing an Outside Call on Hold 5.1 Placing an Outside Call on Hold . On line L 1 0 3 5 < 7 i 7 c 5 o 1 n or L 1 < i c o 1. L1 : 2. mm:ss : 3.035775141 : 4. : m m : s 4 1 n s > s m m : s s n s > (incoming call) The CO line number you are using. Talk time, count by second Dialed digits, n - cursor for next digit.
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 < Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:30/73 i c o 1. L2 : 2. mm:ss : 3. : n s > The CO line number you are using. Talk time, count by second Icons for the status of CO lines, and battery. Note: In this wireless system, the held CO line will be released when the held line isn’t picked up within 5 minutes. 7. Making an Intercom Call . Standby . Press the [ INT ] key.
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 I I C M T o D : 1 2 < i c o 1. ICM To 15: 2."ID" : 3. Busy : 4. : Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:31/73 1 5 B u n s > s y Intercom call station 15 Identification Number of the handset. Called party busy prompt Icons for the status of CO lines, and battery. Note: The called party station 15 will remain UN-changed.
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:32/73 8. Answering an Incoming Intercom Call . Handset is ringing. I I C M B y D : 1 5 < i c o 1. ICM By 12: 2."ID" : 3. Ring : 4. : 1 2 R i n s > n g Intercom call from station 12 Identification Number of the handset. Intercom ringing prompt Icons for the status of CO lines, and battery. .
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:33/73 1. 035765432n n: 2. L1 : 3. mm:ss : 4. : Dialed digits, n - cursor for next digit Another CO line number you are using. Talk time, count by second Icons for the status of CO lines, and battery. . Press [FCN] and press [CONF] (same as [*] ) to bridge the two CO lines L 1 0 3 , L 2 5 7 6 < i c 5 o 1. 035765432n n: 2. L1,L2 : 3.
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:34/73 . If the transferred call didn't answer over 3 minute, the system will recall to all the handsets to remind there is a line has been unanswered and in holding state for too long. The icon below the LCD will indicate the transferred line. . Press [ any one of the digit ] key, or you may press the recalling [ Lx ] to pick up the CO ringing line.
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 < Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:35/73 i c o 1. L1 : 2. 775141n : 3. mm:ss : n s > The CO line number you are using. Dialed digits, n - cursor for next digit Talk time, count by second . Press [FCN]. The LCD will display L 1 7 7 5 < 1 i 4 c m m : 1 n o n s > s s 1. L1 : The CO line number you are using. 2. 775141n : Dialed digits, n - cursor for next digit 3.
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:36/73 3. mm:ss : Talk time, count by second . When you release the line, the dial mode will change to the pulse mode again automatically. 14. DND Function The Do Not Disturb feature is useful to temporarily prevent interruptions during meetings or telephone conversations. When you activate the DND feature, you will not hear incoming call rings. 14.
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:37/73 16. Out Of Range Warning The LCD will display the “Out Of Range” and a double beep warning when the handset is too far from the base unit. You have to move closer to the base unit for clear conversation. . On line L 1 7 7 5 < 1 i 4 c 1 o 1. L1 : 2. 775141*25n : 3. mm:ss : * n m m : s 2 5 n s > s The CO line number you are using.
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:38/73 17. Battery Low Warning The warning indicator appears when the battery of the handset becomes weak. If you are on a call when battery low, you will hear the double beep, end the conversation as soon as possible. Otherwise, you may lose the call. The icon will warning you about the battery low status. 18.
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:39/73 VII. BASIC OPERATION (MHS-2 BASE UNIT ONLY) 1. Standby Mode Normally, the base unit will automatically be in the standby mode. The user can use the base unit to make a call. Or programming the database, or accessing the directory,… etc.
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:40/73 H e a d s e t m m : s s H a n d s e t m m : s s OR 4. End An Outgoing Call . On line, and the conversation is over, . Just hang up the handset or press [SPEAKER] or [HEADSET] to release the call. 5. Last Number Redial (LNR) 5.1 Making An Outgoing Call by LNR . Pick up a CO line .
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:41/73 6.2 Hold Reminder . If the Hold Reminder Time is not disabled, when you held a CO line over a programmed period of time, a triple beep will be heard to remind you that the line is still held. The related icons will be changed. 6.3 Hold Recall Ring . If the held CO line is not picked up for 3 minutes, all handset units will start to ring (i.e.
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 I C M Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:42/73 T o 1. ICM To 15: 2. Ring : 1 5 R i n g Intercom call station 15 Intercom ringing prompt The called party station 15 will get an intercom ring and display : I C M B y 1. ICM By 12: 2. Ring : 1 2 R i n g s y Intercom call from station 12 Intercom ringing prompt 9.
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:43/73 2. NoFnd : UN-reachable called party prompt 10. Answering an Incoming Intercom Call . Handset is ringing. I C M B y 1. ICM By 12: 2. Ring : 1 2 R i n g Intercom call from station 12 Intercom ringing prompt . Press [PAGE/INTERCOM] to pick up the ringing intercom call, the LCD will display: I C M B y 1. ICM By 12: 2.
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:44/73 12. Transferring CO Call 12.1 Transferring a Call . On line 0 S 3 p 5 e 7 a 7 k 5 e 1 r 4 2 m m : s s . Press [HOLD], and the LCD will display: T R N F T 1. TRNF To : 2. (blank) : 3."ID" : o Transfer call prompt Waiting the station number Identification Number of the handset. .
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 0 S 3 p 5 e Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:45/73 7 a 6 k 5 e 4 r 3 : 2 1 m m : s s 14. PAUSE Function You may use the PAUSE function to make a dialing delay between digits during programming mode. The PAUSE in the speed dialing numbers for certain banking and long distance service. Each time you press PAUSE key, about a 2 seconds delay occurs in the dialing sequence.
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:46/73 VIII. DIRECTORY OPERATION ( HANDSET UNIT ONLY ) The Directory function stores 80 names and phone numbers. Name: maximum 16 characters. Number: maximum 30 digits. 1. Storing the Information into Directory . Press [DIR]. The LCD displays D i r e c t o r y < i c o n s > .
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:47/73 . User can use the [FNC]+[DEL] to delete one character or one digit. . Repeatedly press the dial pad key that letter or symbols, until the display shows the letter or symbol that you want to save. 1 for , - ' & .
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 < Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:48/73 i c o n s > . Press an available [ Lx ], where x = 1/2, handset will automatically pick up an idle CO line and dial out the number L 1 7 7 5 < 1 i 4 c 1 o 1. L1 : 2. 775141*25n : 3. mm:ss : 4. : * n m m : s 2 5 n s > s The CO line number you are using.
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:49/73 D i r e ( E m p < i c t c t y o o ) n r y s > 6. Removing one Information From Directory . Press [DIR]. The LCD displays D i r e c t o r y < i c o n s > . Press digit key to find out the leading-letter what you want to find. For instance: “John Smith” J ( # : < S i e c a o r n c s h > ) .
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:50/73 IX. DIRECTORY OPERATION ( MHS-2 BASE UNIT ONLY ) The Directory function stores 80 names and phone numbers. Name: maximum 16 characters. Number: maximum 30 digits. 1. Storing the Information into Directory . Press [DIR]. The LCD displays D i r e c t o r y .
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 D i r Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:51/73 e c t o r y . Press digit key to find out the leading-letter what you want to find. For instance: “John Smith” J S e a c c h . Press the Softkey [Search] to search the “John Smith” The LCD will display J 5 o 7 h 7 n 5 1 S m 4 1 i t h OR . Rotate the [Data Dial] to search the directory information.
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:52/73 . Press digit key to find out the leading-letter what you want to find. For instance: “John Smith” . Or, Directly press [s]/[t] to find the item to edit. J 5 o 7 h 7 n 5 1 S m 4 1 i t h . Press [EDIT] to start to edit the new name . Turn the [data Dial] to advance the character through the alphabet, and [<], [>] to move the cursor.
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 J 5 o 7 h 7 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:53/73 n 5 1 S m 4 1 i t h . Press [DELETE] to delete this item D e l N o e t e ? Y e .
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:54/73 X. ONE-TOUCH SPEED DIAL OPERATION ( MHS-2 BASE UNIT ONLY ) The One-Touch Speed Dial function stores 12 names and phone numbers. Name: maximum 16 characters. Number: maximum 30 digits. 1. Storing the Information into One-Touch Speed Dial . Press [PROGRAM]. . Rotate the Data Dial to select One Touch Dial O n e T o u c h D i a l .
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:55/73 . Press [PROGRAM]. . Rotate the Data Dial to select One Touch Dial O n e T o u c h D i a l . Press the center of the Data Dial to select 0 1 : ( E m p t y ) . Rotate the Data Dial to select One-Touch which you want store J 0 o 6 h : n 5 7 S m i 7 5 1 t 4 h 1 t 4 h 1 Or . Press the One-Touch button directly.
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 O n Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:56/73 e T o u c h D i a l . Press the center of the Data Dial to select 0 1 : ( E m p t y ) . Rotate the Data Dial to select One-Touch which you want store J 0 o 6 h : n 5 7 S m i 7 5 1 t 4 h 1 t 4 h 1 Or . Press the One-Touch button directly. J 0 o 6 h : n 5 7 S m i 7 5 1 .
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:57/73 N o Y e .
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:58/73 XI. CALLER ID OPERATION ( HANDSET UNIT ONLY ) 1. Caller ID Call Back Dialing method The system provides 4 different call back operations. There are 7-10-11, Always 11, Smart Dial, and Exact in this system. If Smart Dial option is chosen, the user must program their local area code.
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:59/73 ( E m p < i or A r e a 0 3 5 < i t c c y o ) n s > C o d e o s > 1. Area Code : 2. (empty) : 3. 035 : 4. : n You are programming Area Code. The current setting is "empty". The current setting is "035". Icons for the status of CO lines, and battery. . Enter [ # ] to enter the changing mode, and then, .
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 T O M 0 3 5 < or N o N o < Or P r i Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:60/73 M Y T E C O M 7 7 5 1 2 3 4 L 1 i c o n s > N a m e N u m b i c o n v a t e i c o n O f c o e s r > s > L 1 L 1 < or O u t < i A r n s 1. L1 : 2. TOMMY TECOM : 3. "No Name" : 4. "No Number" : 5. "Private" : 6. "Out Of Area" : e a L 1 > The Caller's ID is for Line#1.
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 I D : < Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:61/73 1 i 2 c o 1."Ring": 2."ID" : 3. : n s > Ringer volume that may be Low, Mid, Hi or DND. Identification Number of the handset. Icons for the status of CO lines, and battery. . Press [MUTE] again, back to the line 1 caller information. And so on... T O M M Y T E C O M 0 3 5 7 7 5 7 8 9 0 L 1 < i c o n s > 1. L1 : 2.
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:62/73 3.3 Scroll the Calls in the CID Data Base . In CID database retrieve mode, current caller index number is 11 T O M M Y T E C O M 0 3 5 7 7 5 7 8 9 0 < i c o n s > 1. TOMMY TECOM : 2. 0357757890: Incoming caller’s name. Incoming caller’s number. . Press [s]/[t] to scroll the CID data base between calls.
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:63/73 3.5 Dial Back for the Caller on the Display You may answer the call easily while you are reviewing the caller ID database. 3.5.1 Dial Back the Phone Number with 7-10-11 . LCD shows the caller information, and you want to return the call T O M M Y T E C O M 0 3 5 7 7 5 1 4 1 2 < i c o n s > 1. TOMMY TECOM : 2. 0357751412: Incoming caller’s name.
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:64/73 3.6 Delete a Caller from the Caller Data Base You may delete a caller information easily from the caller database after you have returned the call or you have reviewed the caller list. . LCD shows the caller information, and you want to delete it from the caller list.
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:65/73 0 3 5 7 7 ( N u m b < i c 5 e o 1. 0357757890 : 7 r n 8 ? s 9 ) > 0 The CID caller ID number. . Press [PRG] again to store the name and number into directory, a confirmation beep will be heard. The LCD will display: D i r O K ! < e c t o r y i c O n s > 1. Directory OK! : Memory location & programming OK 3.
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:66/73 T O M M Y T E C O M 0 3 5 7 7 5 1 4 1 2 L 1 < i c o n s > 1. TOMMY TECOM : 2. 0357751412 : Incoming caller’s name. Incoming caller’s number. . Press [MUTE] again to return the original line#1 talking mode L 1 7 7 5 < 1 i 1. L1 : 2. 775141n : 3. mm:ss : 4. : 4 c m m : 1 n o n s > s s The CO line number you are using.
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:67/73 XII. CALLER ID OPERATION ( MHS-2 BASE UNIT ONLY ) 1. Caller ID Call Back Dialing method The system provides 4 different call back operations. There are 7-10-11, Always 11, Smart Dial, and Exact in this system. If Smart Dial option is chosen, the user must program their local area code.
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 < 3 > Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:68/73 3 4 . Press the [Center of the Data Dial] to confirm the selection . And then repeat the operation to select the other digits A r 3 e a 4 C o 5 1. Area Code : 2. 3 4 5: d e You are programming Area Code method. The dialing mode “3 4 5”. . Press the [Center of the Data Dial] to confirm the selection .
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 N o L 1 Or P r L 1 or O u L 1 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:69/73 : N a m e N o N u m b i v t a t O f e r e A r 1. L1 : 2. TOMMY TECOM : 3. "No Name" : 4. "No Number" : 5. "Private" : 6. "Out Of Area" : e a The Caller's ID is for Line#1. Incoming caller’s name. The Name is not sent from your telephone company. The Number is not sent from your telephone company.
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 D e l N o Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:70/73 e t e ? Y 1. Delete ? : e s Prompt for user re-confirmation . Press softkey [Yes] to confirm and delete all the CID database A l l C I 1. All CID: 00 : D : 0 0 All CID data are deleted. 4.3 Scroll the Calls in the CID Data Base . In CID database retrieve mode, .
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:71/73 OR . Press the [Center of the Data Dial] And then the unit will dial out the number automatically. The dialed out number will be always 11, or exact dial or smart dial. It will depend on the user setting. For example: exact dial, the LCD will display: The LCD will show: 8 S 6 p 2 e 1 a 2 k 3 e 4 r 5 6 7 m m : s s 4.
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:72/73 4.7 Store a Caller Number into the One-Touch Speed Dial You may store a caller phone number from the caller list, into your one-touch speed dial memory. . Press [PROGRAM]. . Rotate the Data Dial to select One Touch Dial O n e T o u c h D i a l . Press the center of the Data Dial to select 0 1 : ( E m p t y ) .
TECOM SOHO Department Issued by: Frank Yang-Hsin LIN Revision: 0.3 L 1 : Preliminary Feature Operation for Casio 1&2-Line Cordless Phone Date: Mar. 31, 2000 Page:73/73 5 6 8 5 5 5 4 5 6 7 And, the LCD icon will display “CALL WAITING” Press [>] again, the LCD will back to the normal display.