Operation Manual

TECOM SOHO Department Preliminary Feature Operation for Casio 1&2-Line Cordless Phone
Issued by: Frank Yang-Hsin LIN Date: Mar. 31, 2000
Revision: 0.3 Page:9/73
Flick1: Base unit is in use the intercom trunk.
Lit: Handset units are in use the intercom trunk.
Speaker LED
Dark: Idle mode.
Lit: Speakerphone mode.
Headset LED
Dark: Idle mode.
Lit: Headset mode.
Line1/Line2 Red LEDs
Dark: CO line is idle.
Slow: CO line is ringing.
Fast: Handset unit user holds the CO line.
Lit: Handset unit user uses the CO line.
Line1/Line2 Green LEDs
Dark: CO line is idle.
Slow: Base receives a transfer call, or a CO line “hold recall ring”.
Fast: Base unit holds the CO.
Lit: Base unit user uses the CO line.
4. Icons on the Handset unit
The LCD of the handset is 2*15 dot matrix with some icons. There are 2 CO line icons to show the CO line status on the LCD.
They have many different combinations to show the line status, including Idle, Ring, Talk, Hold, Transfer Ring, … etc. And
battery power status.
4.1 CO Line Status
For all 2 CO Lines status. There are 3 different icons on each CO line. They are “Handset”, “Ring”, and “Ring Off” icons
Ring Off Icon: (I) For the CO line is programmed to the “Ring Off” mode.
Handset Icon: (I) Off: CO Line is idle.
(II) On: CO Line is in use.
(III) Flash: CO Line is held.
Ring Icon: (I) Off: CO Line doesn’t ring.
(II) Flash: CO Line is ringing.
Handset and Ring Icons: (I) Both Flash: Transfer Ring or Recall Ring
4.2 Other Status
The other icon is for battery low status.
Battery Icon: For the battery power status.