Operation Manual

TECOM SOHO Department Preliminary Feature Operation for Casio 1&2-Line Cordless Phone

Issued by: Frank Yang-Hsin LIN Date: Mar. 31, 2000

Revision: 0.3 Page:13/73

. Press [s]/[t] to select the FLASH Time programming mode. The LCD will display:

F l a s h T i m e

6 0 0 m s ( # : c h g )

1. Flash Time : Flash time programming mode

2. 0.6 Sec. : Programmed FLASH time

. Press [#] to select the new FLASH time selection: 600/375/275/100ms

F l a s h T i m e

2 7 5 m s ( # : c h g )

. Press [OFF], or [PRG], or [s]/[t] to confirm and quit the new setting or change to the other programming.

Note: When any handset changes its Flash Time, the other handsets are automatically changed to the same universal

Flash time setting.

7. Tone/Pulse Mode Programming

You may program your phone to be a Tone or Pulse dialing phone.

. Standby, press [PRG].

. Press [s]/[t] to select the Tone/Pulse programming mode.

T o n e / P u l s e

T o n e ( # : c h g )

T o n e / P u l s e

P u l s e ( # : c h g )

1. Tone/Pulse : You are programming Tone/Pulse.

2. Tone or Pulse: The current setting is Tone/Pulse.

. Press [#] to toggle between the Tone and Pulse modes. The LCD will display:

T o n e / P u l s e

P u l s e ( # : c h g )

T o n e / P u l s e

T o n e ( # : c h g )

1. Tone/Pulse : You are programming Tone/Pulse mode.

2. Pulse or Tone: Changed to Pulse/Tone Mode.

. Press [OFF], or [PRG], or [s]/[t] to confirm and quit the new setting or change to the other programming.

8. Hold Reminder Time Programming

Default: 30 seconds.

. Standby, press [PRG].

. Press [s]/[t] to select the Hold Reminder Time programming mode. The LCD will display:

H o l d R e m i n d

3 0 S e c ( # : c h g )