Operation Manual

TECOM SOHO Department Preliminary Feature Operation for Casio 1&2-Line Cordless Phone

Issued by: Frank Yang-Hsin LIN Date: Mar. 31, 2000

Revision: 0.3 Page:29/73

5. Placing an Outside Call on Hold

5.1 Placing an Outside Call on Hold

. On line

L 1 m m : s s

0 3 5 7 7 5 1 4 1

< i c o n s >

L 1 m m : s s

< i c o n s >

(incoming call)

1. L1 : The CO line number you are using.

2. mm:ss : Talk time, count by second

3.035775141 : Dialed digits, n - cursor for next digit.

4. <icons>: Icons for the status of CO lines, and battery.

. Press [HLD], and the LCD will display:

T R N F T o

I D : 1 2

< i c o n s >

1. TRNF To : Transfer call prompt

2. (blank) : Waiting the station number

3."ID" : Identification Number of the handset.

4. <icons>: Icons for the status of CO lines, and battery.

. After the 10 seconds time-out, the display will revert to the final idle display if nothing is dialed.

R i n g : L o w

I D : 1 2

< i c o n s >

1."Ring": Ringer volume that may be Low, Mid, Hi or DND.

2."ID" : Identification Number of the handset.

3. <icons>: Icons for the status of CO lines, and battery.

5.2 Hold Reminder

. If the Hold Reminder Time is not disabled, when you held a CO line over a programmed period of time,

a triple beep will be heard to remind you that the line is still held. The related icons will be changed.

5.3 Hold Recall Ring

. If the held CO line is not picked up for 3 minutes, all handset units will start to ring (i.e., Recall Ring)

to remind all of the users. The related icons will be changed.

. Press [ any one of the digit ] key, or you may press the ringing [ Lx ] to pick up the CO hold recall ringing line

6. Retrieve a Line on Hold

. A CO line being held

. Press the [ Lx ] held line key, where x = 1/2, the LCD will display

L 2 m m : s s