User Manual

4
3. Configuration
‘ Configure’ page allows you to make all the required settings in order to integrate the
adapter into an existing WLAN.
Profile: Your settings can be collected under one name, e.g. if you want to use your
computer in more than one WLAN network. Click ‘Save’ and all the current
settings will be assigned to the profile name and saved. They will then be
available for future use and are ready to be called up. Click ‘Delete’ to remove
the selected profile. Click ‘Apply’ to use the selected profile.
SSID: All computers in the domain of a wireless LAN must have the same identity in
order to be recognized. If you click the Open arrow you can see a list with the
SSID of all networks which are within the range of the computer. Select the
SSID which you would like to connect up to.
Desired rate: Here you can select the transmission rate. Recommended: ‘Auto’ .
Module Type: Here you can define the type of network: ‘Infrastructure’ (all
cable-linked and radio controlled computers within the network are
connected up to one another via an access point) or ‘Ad hoc’ (the
computers only communicate with one another via radio and have no