User's Manual

Not e

The graphics shown in this manual may differ slightly from your router’s screens.

The images that appear here are provided as examples only.

O CONFIGURE

E TUP PARAME TE RS

1. LAN MAC Address:

Shows the MAC Address ( also known as the Ethernet

address) of the LAN interface.

Review the LAN IP Address information and change if necessary.

These two fields show the Device IP Address and Subnet Mask as seen by others on

your Local Area Network (LAN). Most users will not need to change these values (default

IP is 192.168.1.1, subnet mask is 255.255.255.0) .

Not e

If you change the LAN IP Address with the DHCP server running, you'll need

to restart your client machines. If you change the LAN IP Address without the

DHCP server running, you'll need to manually reconfigure your clients' IP

addresses.

LAN DHCP Server: Enable DHCP functionality on LAN.

Not e

If you don’t enable DHCP on your router, you’ll need to manually configure an IP

address for each computer on your network.

4. Setup the LAN DHCP Starting IP Address and E nding IP Address.

I. Make sure there is not already a DHCP server running on your network.

II. Make sure that each computer on your network is configured to receive an IP

address automatically.

III. On the DHCP screen, click

E nable

IV. Type the

LAN DHCP Starting IP Address

. The address you specify will be the

first IP address that can be assigned to a computer on the network.

V. Type the LAN DHCP E nding IP Address. The address you specify will be the last

IP address that can be assigned.