User's Manual

Exam ple

If you choose 192.168.1.51 as the starting address and 192.168.1.100 as the

ending address, the DHCP server will assign addresses to network clients that

are between 192.168.1.51 and 192.168.1.100.

5.LAN Spanning Tree Protocol: Enables the use of the E thernet 802.1d Spanning

Tree Protocol to eliminate bridging loops across the LAN interfacesWAN Setting:

The second part of the Basic screen is the configuration of WAN. The figure is as the

following.

WAN Host Name:

Some ISPs require that a host name be provided when requesting an IP

address through DHCP Server.

2. WAN Domain Name: Sets the domain name to be provided to LAN clients who request an

IP address through DHCP Server.

3. WAN MAC Address: Some ISPs need that a specific MAC address be used. Also known as

MAC address cloning this feature allows you to set the MAC address of the WAN interface.

4. WAN IP Address: Sets the IP address of the WAN interface.

WAN Subnet Mask:

Sets the IP mask of the WAN interface.

6. WAN Default Gateway: Sets the IP address of the default gateway on the WAN.

7. WAN DNS Servers: Sets the IP address of the DNS Servers to use for resolving host names.

Figure 7. Basic Screen (2)