User's Manual

20
Wireless
Use the Wireless screen to configure your router for wireless access.
The Wireless screen is shown in the figure below.
1. Network Name (SSID): Sets the Network Name (also known as SSID) of this network.
2. Network Type: Selecting Closed hides the network from active scans. Selecting Open
reveals the network to active scans.
3. Country: Restricts the channel set based on country requirements.
4. Radio: Enables or disables the wireless radio.
5. AP Mode: Selecting Wireless Bridge disables access point functionality. Only wireless bridge
(also known as Wireless Distribution System or WDS) functionality will be available. Selecting
ª
Figure 15. Wireless Screen (1)