LED/LCD Television Model:: LED19DHRBJBD LED19DHRDBJBD LED22DFRBJBD LED22DFRDBJBD
1 PREFACE 2 2 SAFETY PRECAUTIONS 2 3 IN THE CARTON 6 4 FRONT BACK CONNECTIONS OF TV 7 HDMI Connection USB PORT Connection 8 8 9 9 10 10 11 11 Remote control instructions in ANALOGUE TV mode Remote control instructions in DIGITAL TV mode 12 13 Remote control instructions in USB mode Remote control instructions in DVD mode Remote control instructions in TELETEXT mode Remote control setup 14 15 TV Operation Auto Installation Select Input Source Picture Menu Sound Menu Channel Menu Feature Me
1. 2.
3
4
5
3.
4. FRONT BACK CONNECTIONS OF TV Front View 1. OPEN/CLOSE in DVD mode. 2. PLAY/PAUSE in DVD mode. 3. Press“VOL+”or “VOL-”to increase or decrease the sound level. 4. Press“CH+”or “CH-”to change channels. 5. Press “MENU”to bring up the main menu on the screen. 6. Press“SOURCE”to select the input source. 7. Press“ ” button to turn standby mode on or off. 8. POWER INDICATOR: show red in standby mode, show blue when your TV is switched on. 9. REMOTE SENSOR: infrared sensor for the remote control. 10.
5. BASIC INSTALL ATION Power Cord Connection Connect the power cord correctly as shown. Press the STANDBY button of your TV to switch on the TV. The power indicator on the front panel lights up in Blue or Green. DC 12V Antennas Connection To ensure good picture and sound, TV antenna system needs to be installed. The antenna system as shown can be sourced from TV equipment shops, which will provide service for correct installation and connection.
AV Connection Connect the VIDEO and AUDIO output jack of the DVD or VCR to the AV IN jacks on the set using the RCA cable (Yellow [video], White and Red [left & Right audio]). Select the AV input source using the SOURCE button on the remote control. VIDEO L R PC AUDIO VGA(PC) COAX HDMI RF IN USB Y Pb Pr TV Back Video Cable V L R DVD or VCR YPbPr Connection Connect the YPbPr output of the DVD or VCR to the YPbPr input on the set.
COAX Connection When connected the coaxial output to your audio amplifier,playing back the discs Dolby, MPEG contents,the coaxial output the original signal to your amplifier. Your Amplifier must have the corresponding decoding function. TV Back VIDEO L R PC AUDIO VGA(PC) COAX HDMI RF IN USB Y Pb Pr Coax Cable SPDIF INPUT Audio Amplifier Back Audio Amplifier VGA(PC) Connection Connect the RGB output of the PC to the VGA (PC) jack on the set.
HDMI Connection HDMI connection allows the user to transfer all audio/video/control signals through one cable only. These signals are transferred in digital. HDMI cable is not supplied. VIDEO L R PC AUDIO VGA(PC) COAX HDMI RF IN USB Y Pb Pr TV Back HDMI Cable HDMI OUT DVD or VCR Back DVD or VCR USB PORT Connection Insert the USB flash drive to the USB port. Select USB channel source via the SOURCE button on the remote control.
Remote control instructions in Analogue TV mode Turn the LED TV ON or OFF. Press to mute the sound. Press again or press VOL+ to un-mute the TV. NUMBER BUTTONS Press 0-9 to select a TV channel directly when you are watching TV. The channel change after 2 seconds. Return to the previous channel viewed. LIST Press to display the TV program list. DISPLAY Press to display the source and channel's information. ASPECT Selects screen display ratio. I/II Press to search the NICAM modes.
Remote control instructions in Digital TV mode NUMBER BUTTONS Press 0-9 to select a channel. LIST Display the recorded file list. INFO Press to display the source and channel's information. CH+/CHWhen watching a channel, changes the channel. AUDIO To display audio menu. T.LIST Press to display the Record Timer Schedule List. R.LIST Display the recorded file list. COLOR BUTTONS Color buttons (respectively red, green, yellow and blue) used in a few sub-menus. REC Press to record the TV program in DTV mode .
Remote control instructions in USB mode Stop playing or stop. Press to play or pause the program. Fast backward and forward key. Jump to previous and next track. REPEAT Press REPEAT button to select the repeat mode.
DVD Note: The DVD function just for LED19DHRDBJBD/LED22DFRDBJBD . TITLE When DVD is playing,bring up the TITLE MENU.
Rem ote co ntrol inst ruct ions in TELETEXT mode NUMBER BUTTONS Press 0-9 to select a teletext page. Page up and Page down in TELETEXT mode. COLOR BUTTONS Select 4 Preferred TELETEXT page. TTX Press to switch between TV and Teletext mode. INDEX Request index page when index link is valid. MIX TV and TTX picture are mixed together in transparent background. HOLD Freeze the current page. SUBPAGE TELETEXT Subpage. REVEAL Reveal or hide the hidden words. SIZE Change the picture size.
Remote control setup 1. Open the cover. 2. Use two AAA size batteries.When inserting the batteries, make sure correct polarities “+”and “-” marks on the batteries line up correctly with compartment markings . 3. Replace the battery cover. To prevent battery leakage which may result in bodily injury or damage to the remote: 1. Install all batteries correctly, and as marked on the remote control. 2.
7. TV Operation Auto Installation If this is the first time you are turning on the TV and there are no programs in the TV memory, the “Auto Installation” menu will appear on the screen. There are 5 setups as follow: Setup 1: Set up the TV Location Press ▼ / ▲ button to select Home Mode in the main menu , then press OK/ENTER button to enter. Press ◄ / ►button to choose OK or Cancel, press OK/ENTER button to confirm.
Press the green button to enter the next page, the red button to return to the previous page and the EXIT button to exit the entire menu . Setup 4: Set up the Auto Power Off Press ▼ / ▲ button to select Auto Power Off in the main menu, then press OK/ENTER button to enter. Auto Installtion -Setup4Auto Power Off: Hours can be chosen for a Off 1 Hour continuous viewing, and after that the TV will be 2 Hours powered off."off" means 4 Hours the viewing is timeless.
Select Input Source Input DTV ATV AV YPBPR HDMI PC Media DVD Press SOURCE button to display the input source list; Press ▼ / ▲ button to select the input source you want to watch; Press OK / ENTER button or ► button to enter the input source; Picture Menu Press MENU button to display the main menu. Press ▼ / ▲ button to select Picture in the main menu, then press OK / ENTER button or ► button to enter.
Picture Middle Noise Reduction Picture Sound Channel Feature Setup Move Ent e r Enter Exit Exi t Menu Ret u rn 1. Press ▼ / ▲ button to select the option that you want to adjust in the Picture menu, then press OK / ENTER button or ► button to enter. 2. Press ◄ / ► button to adjust or press ▼ / ▲ button to select. 3. After finishing your adjustment, press MENU button to save and return back to the previous menu, or press EXIT button to exit the entire menu.
Sharpness Press ▼/▲ button to select Sharpness, press OK / ENTER button or ► button to enter, then press ◄/► button to adjust. Colour Press ▼/▲ button to select Colour, press OK / ENTER button or ► button to enter, then press◄/► button to adjust. Tint Press ▼/▲ button to select Tint, press OK / ENTER button or ► button to enter, then press◄/► button to adjust. (Only available in NTSC mode.
Picture Middle Noise Reduction Off Picture Low Middle Sound High Channel Feature Setup Move En t er E n ter Exit Exit Menu R e turn Sound Menu Press MENU button to display the main menu. Press ▼ / ▲ button to select Sound in the main menu, then press OK / ENTER button or ► button to enter. Sound Standard Sound Mode Picture Sound Bass 50 Treble 50 Balance 0 Surround Off Channel Feature AVL Off SPDIF PCM Setup Mo v e Enter Ent e r E x it Exit Men u Ret u rn 1.
Bass Press ▼/▲ button to select Bass, press OK / ENTER button or ► button to enter, then press ◄/► button to adjust. Bass - + 50 Treble Press ▼/▲ button to select Treble, press OK / ENTER button or ► button to enter, then press ◄/►button to adjust. Balance Press ▼/▲ button to select Balance, press OK / ENTER button or ► button to enter, then press ◄/►button to adjust. Surround Press ▼/▲ button to select Surround, press OK / ENTER button or ► button to enter, then press ▼/▲button to select On or Off.
Channel Menu Press MENU button to display the main menu. Press ▼/▲ button to select Channel in the main menu, then press OK / ENTER button or ► button to enter. Channel Channel Management ENTER Favorite Management Picture Sound Channel ENTER Country Australia Auto Search ENTER DTV Manual Search ENTER ATV Manual Search ENTER Feature Setup Move Enter Enter Exit Exit Menu Re t urn 1.
Channel-Favorite Manager Program Name NO. Fav1 Fav3 Fav2 Type Fav4 0097 Television dtv 0700 BBC Radio 1 dtv 0702 BBC Radio 2 dtv 0703 BBC Radio 3 dtv 0704 BBC Radio 4 dtv 0714 Heat dtv 0721 MOJO dtv 0101 Ttext Holidays dtv 0103 Teletext Games dtv Favorite 1 Move CH+- Favorite 2 Pa g e +- Ex i t Favorite 3 E x it Favorite 4 Men u Re tu r n Country Press ▼/▲ button to select Country, then press OK / ENTER button or ► button to enter.
DTV Manual Search ( Only available in DTV mode). Press ▼/▲ button to select DTV Manual Search, then press OK / ENTER button or ► button to enter. Note: Press the OK / ENTER button to save the channel when the Enter Character turn purple. Channel-DTV Manual Search Picture Channel 27 Frequency(KHz) 522000 BandWidth(MHz) 8 Sound Start Channel Strength 95% Quality PC Setup 100% Setup Move Enter En te r Ex i t E x it M e nu R e tu r n ATV Manual Search ( Only available in ATV mode).
1. Press ▼/▲ button to select the option that you want to adjust in the Feature menu, then press OK / ENTER button or ► button to enter. 2. Press ▼/▲ button to select. 3. After finishing your adjustment, press MENU button to save and return to the previous menu, or press EXIT button to exit the entire menu. Lock Press ▼/▲ button to select Lock, then press OK / ENTER button or ► button to enter . A password is required to enter the Lock settings. Enter the default password '0000' to unlock the menu.
Hotel Setting Hotel Setting On Off Off Off Off Off Off Hotel Lock Channel Lock Picture Lock Sound Lock Feature Lock Setup Lock Key Lock Source Lock Set Source Channel Number Max Volume Default Volume Off 0 100 30 Next Page --> Clear Lock --> DataBase Export --> DataBase Import --> Previous Page --> --> Hotel Lock/Channel Lock/ Picture Lock/Sound Lock/Feature Lock/Setup Lock/Key Lock/ Source Lock Press ▼/▲ button to select Hotel Lock/Channel Lock/ Picture Lock/Sound Lock/Feature Lock/ Setup Lo
Language Press OK / ENTER to enter Language, use ▲▼ to set OSD language. Feature-Language Picture Sound OSD Language English Preferred Subtitle English Preferred Audio English DTV Teletext Language English ATV Teletext Language West Channel Feature Setup Move Enter En te r E x it Ex i t Men u Re tu r n Clock Press OK / ENTER to enter Clock, use ▲▼ to set the Time Zone/DST.
Auto Power Off Press ▼/▲ button to select Auto Power Off, press OK / ENTER button or ► button to enter, then press ▼/▲ button to select Off, 1Hour, 2 Hours, 4 Hours .
Setup Menu Press MENU button to display the main menu. Press ▼/▲ button to select Setup in the main menu, then press OK/ENTER button or ► button to enter. Setup Picture 15 Seconds PC Setup ENTER Blue Screen Off Home Mode Home Reset TV Setting ENTER Software Upgrade ENTER Sound Channel OSD Timer Feature Setup Move En t er E n ter Exit Exit Menu R e turn 1. Press ▼/▲ button to select the option that you want to adjust in the Setup menu, then press OK / ENTER button or ► button to enter.
Setup 15 Seconds OSD Timer Picture Sound Auto SCART On PC Setup Off ENTER On Blue Screen Channel Feature Off Home Mode Home Reset TV Setting ENTER Software Upgrade ENTER Setup Move E n ter En t er Exit Exit Menu R e turn PC Setup( Only available in PC mode). Press ▼/▲ button to select PC Setup, press OK / ENTER button or ► button to enter.
EPG Menu Press EPG get into EPG menu. EPG Weekly Mode Five 0005 31/05/2007 13:39:28 31/05/2007 14:30-31/05/2007 16:30 Battle of The V.1 World War ll drama starring Michael Rennie and Patricia Mdeina. The Polish resistance tack it upon themselves to smuggle details of the Nazis' secret 31/05 Thu Thu Fri Sat Mon Sun Tue Wed Five 12:30-14:30 Before Winter Comes Abc1 14:30-16:30 Battle of The V.
PVR Menu PVR function is only available for DTV, includes Record, Timeshift and Playback functions. Record includes in time record and preserve record. In time record can be worked through REC key immediately, and preserve record needs to preserve beforehand. Record and Playback can be done at the same time. Timeshift is another function for both recording and playing. Note When P PVR function is in progress, please don’t unplug the power and the external USB device at will.
Focus on the previous option on the partition list,Focus on the next option on the partition list. Red Format the chosen partition. Green Set the chosen partition as the default partition. Auto Timeshift Press ▼/▲ button to select Auto Timeshift Timeshift, press OK / ENTER button or ► button to enter, then press ▼/▲ button to select off (Stop auto Timeshift), Auto (Start auto Timeshift).
Recorder : Off、On .“Off” means to preengage program for watching only, “On” means to preengage program for watching and recording.
Recorder Start REC Press REC to start recording. Message Message Do you want to start Recording? OK Initializing Recorder ... Cancel Menu shows as follows: REC PAUSE Start or pause recording. DISPLAY Enter banner info menu. STOP Stop REC. Press" "STOP button on remote control to end recording manually; Message Do you want to stop Recording? Cancel OK Timer REC There are two methods to set a timer. As follows: 1.
EPG Weekly Mode Five 0005 31/05/2007 13:39:28 31/05/2007 14:30-31/05/2007 16:30 Battle of The V.1 World War ll drama starring Michael Rennie and Patricia Mdeina.The Polish resistance tack it upon themselves to smuggle details of the Nazis' secret 31/05 Thu Thu Fri Sat Sun Mon Tue Wed Five 12:30-14:30 Before Winter Comes Abc1 14:30-16:30 Battle of The V.
Menu shows as follows: 00:00:00 Timeshift Play At Timeshift Play condition, the system record DTV and play it at the same time. Timeshift Play is start by press , at Timeshift Play condition, it can work Pause, Fast Forward, Fast Rewind. Timeshift Record Timeshift Record condition,similar to Record mode. PAUSE Start or pause recording and playing. DISPLAY Enter banner info menu and close time menu. STOP Stop Timeshit.
8. Media(USB) Menu Note: Before operating Media menu, Plug in USB device, then press Source button to select Media. Input Photo DTV ATV AV YPBPR HDMI PC Media DVD 1. Press ◄ / ► button to select the option that you want to select in the USB menu, then press OK/ENTER button or ▼ button to enter. 2. Press ◄ / ► button to adjust or press ▼ / ▲ button to select.
Same as " " key on remote, to start playing pictures in slide show mode. Same as " " key on remote, to stop sliding show, and return to the file browser. Same as " "/" " key on remote, to play the previous or next file directly To rotate the playing picture(0 º、90 º、180 º、270º). To zoom the playing picture. Same as "INFO" key on remote, to display the information of the current file. To enter “Photo Setup” menu, including “Repeat Mode”, “Background Music”, “Music Source”, ”Slide Time”, “Effect”.
Music Renturn 57843107714123050635.mp3 050635.mp3 001/002 64MB DFGFGW AEVGGA Delete Add/Del all to playlist Move CH+/- Page+/- Enter Enter E x it E xi t Press ▲/▼ button to select the folder that you want to view, press OK/ENTER button or ► button to select the sub folder and press OK / ENTER button to play , press Menu button to return back . Music Player A New Day Has Come.
Movie Menu Press ◄ / ► button to select Movie in the main menu, then press OK/ENTER button or ▼ button to enter, press MENU button to return back to the previous menu. Movie Renturn 57843107714123050635.rm 050635.mov 43dea006ef5.
To set AB repeat, the first press sets A point, and the second press sets B point, and then play AB between A and B repeatedly. Same as " "/" " key on remote, to play the previous or next file directly. To enter the play list menu. Same as "INFO" key on remote, to display the information of the current file. To enter “Movie Setup” menu, including “Program”, “Subtitle”, “Audio”, ”Repeat Mode”. To enter “GO TO” function, user can input the time he want to start directly.
9.DVD Operation (DVD MODELS ONLY) Basic Operation 1. Press Source button on the remote controller to select DVD input source. 2. Press OPEN / CLOSE button to load from into disc tray. Hold the disc without touching either or its surfaces, insert the DVD with the label toward the device’s back panel into the DVD slot on the right side of you TV set. Only push the DVD slightly until the unit feeds it automatically.
OSD Language This is used to select the OSD language. · English · French · Spanish - - General Setup Page - TV Display 16: 9 OSD Lang ENG Screen Saver Last Memory On Off English French Spanish Screen Saver Start the screen saver, the screen saver image will appear when the player stops or the picture is frozen for a few minutes. This saver can keep the screen from being damaged. · On (Start the screen saver). · Off (Remove the screen saver).
- - General Setup Page - TV Display 16: 9 OSD Lang ENG Screen Saver Last Memory On Off On Off Audio Setup · Speaker Setup In the “Audio Setup page” press “ ” button to select “Speaker Setup” item, press the “OK ENTER” or “ ” button (play) into the “Speaker Setup Page”. - - Audio Setup Page - Speaker Setup Dual Mono Dynamic Downmix · LT/RT A disc recorded multi channel soundtrack, the output signal will be incorporated to left and right channel.
Dual Mono This is used to select the Stereo, L-MONO, R-MONO and MIX-MONO. - - Audio Setup Page - Speaker Setup Dual Mono Dynamic Stereo L-Mono R-Mono Mix-Mono Dynamic This option is used to set the compression ratio in order to control the sound (Volume) contrast. - - Audio Setup Page - Speaker Setup Dynamic FULL 3/4 1/2 1/4 OFF Preference Setup You must sure no disc in the DVD then you can select Preference Page. TV Type · PAL This is selected when the player is connected to an PAL System TV.
Audio If a language listed below is recorded on the disc, you can play the sound in such language. If not, the language recorded will be used. · English · French ·Spanish - - Preference Page - TV Type Audio Subtitle Disc Menu Parental Password Default Multi ENG ENG ENG English French Spanish Subtitle If a language listed below is recorded on the disc, you set the subtitle to be displayed in such language. If not, the language recorded will be used.
Disc Menu If a language listed below is record on the disc, you can set the Menu to be displayed in such language. If not, the language recorded will be used. · English · French · Spanish - - Preference Page - TV Type Audio Subtitle Disc Menu Parental Password Default Multi ENG ENG ENG English French Spanish Parental When playing disc with parental lock function, you may select an Age Control Grade according to grade of disc and your own preference.
Password User can change the password that is required when the user wants to change the Age Control Grade in the Parental Lock function. NOTE:(Default password is 123456 ) - - Preference Page - TV Type Audio Subtitle Disc Menu Parental Password Default Multi ENG ENG ENG Change Default User can load the original factory setting by choose RESET and press OK button.
10.
11. SPECIFICATIONS This manual is only for your reference, any change to the design and specification will not be advised. Model LED19DHRBJBD LED19DHRDBJBD LED22DFRBJBD 18.5 Inch Screen Size 21.
The Base Stand Installation Guide Lay the TV face-down in a flat,cushioned surface to avoid the screen from damage or scratches. PARTS QTY BASE PLATE(UP) 1 BASE PLATE(DOWN) 1 SCREWS(ST4x12F) 2 base plate(up) Stand base base plate(down) Fix the stand base to the TV using the ST4x12Fx2pcs screws(Black). CAUTION: Keep screws away from children. NOTE: The product images are for illustration purpose only, appearance may very between models.
