Instructions / Assembly

Conbraco Industries, Inc.
Matthews, NC 28105
1.888.229.2874
www.apolloflow.com
is-Tectite_04/18/18
INSTRUCTION SHEET
Push-To-Connect
Tectite™ by Apollo® Fittings
PUSH TO CONNECT
Removal tool
(sold separately).
Place tool around
pipe next to
fitting. Press tool
toward fitting
while pulling pipe
from fitting.
Push Installation
Mark insertion
depth using the
depth gauge
(sold separately).
2
Push pipe (A) and
twist (B) into fitting
until fitting edge
meets depth line.
3
Cut pipe.
1
Push Removal
Pipe Depth for Tectite Fittings
Fitting/Pipe Size Insertion Depth
1" 1-5/16"
3/4" 1-1/8"
1/2" 15/16"
3/8" 15/16"
Removal tool
(sold separately).
Place tool around
pipe next to
fitting. Press tool
toward fitting
while pulling pipe
from fitting.
Push Installation
Mark insertion
depth using the
depth gauge
(sold separately).
2
Push pipe (A) and
twist (B) into fitting
until fitting edge
meets depth line.
3
Cut pipe.
1
Push Removal
See table below for
insertion depths.
After assembly, fittings may be rotated for simpler installation in tight spaces.
Fittings can be used with Copper, CPVC, PE-RT, or PEX pipe. They are removeable and reusable. Install Tectite by
Apollo fittings wet or dry. Tube liners (included) are required to join PEX tubing.