Instructions / Assembly

The Mosack Group, Inc.
Mint Hill, NC 28227
1.888.229.2874
www.apolloow.com
is-Tectite_09/20/2021
INSTRUCTION SHEET
Push-To-Connect
Three Way Ball Valves
PUSH TO CONNECT
Removal tool
(sold separately).
Place tool around
pipe next to
fitting. Press tool
toward fitting
while pulling pipe
from fitting.
Push Installation
Mark insertion
depth using the
depth gauge
(sold separately).
2
Push pipe (A) and
twist (B) into fitting
until fitting edge
meets depth line.
3
Cut pipe.
1
Push Removal
Pipe Depth for Tectite Fittings
Fitting/Pipe Size Insertion Depth
1" 1-5/16"
3/4" 1-1/8"
1/2" 15/16"
3/8" 15/16"
Removal tool
(sold separately).
Place tool around
pipe next to
fitting. Press tool
toward fitting
while pulling pipe
from fitting.
Push Installation
Mark insertion
depth using the
depth gauge
(sold separately).
2
Push pipe (A) and
twist (B) into fitting
until fitting edge
meets depth line.
3
Cut pipe.
1
Push Removal
See table below for
insertion depths.
After assembly, fittings may be rotated for simpler installation in tight spaces.
Fittings can be used with Copper, CPVC, PE-RT, or PEX pipe. They are removeable and reusable. Install Tectite by
Mosack Group fittings wet or dry. Tube liners (included) are required to join PEX tubing.
FSBBV312 - 1/2"
FSBBV334 - 3/4”
The Tectite by Mosack Group Push-To-Connect 3-Way Ball Valve is unique in that it can function as a diverter valve or mixing valve . It is the fastest, cleanest and simplest way
to install or replace a 3-way ball valve on copper, CPVC, PE-RT and PEX piping systems without the use of tools, solder, open ame or glue. The quarter turn, single lever control
allows for simple control of water ow in hydronic and potable water systems.
• Unique 3-way valve acts as a diverter or mixing valve.
• Quarter-turn handle design for simple ow control.
• Constructed of lead free dezincication resistant (DZR) brass for superior reliability and strength.
• Ideal for potable water and hydronic heating applications .
• Demount clip allows for valve removal. (Sold separately)
• Approved for behind-the-wall with no access and burial.
• Corrosion resistant for greater longevity.
• Maximum working pressure of 200 psi and maximum temperature of 250˚F.
Flow Pattern