User Manual

CenterLine
Software Version 1.05
CenterLine Quick Start-up
The following section assumes that your CenterLine hardware has been properly set up. See
—CenterLine Product Kits“ on page 9 - 12 for information on how to configure the system.
General Start-up Sequence
• Apply power to CenterLine.
• Lightbar performs a start up sequence.
• Lightbar displays current software version.
• Lightbar displays <START>.
• <START> display should remain until Enter is pressed to start real-time guidance or the Start
menu is scrolled, using Up or Down to move to another menu option, <SETUP> or <TOOLS>.
First Time Start-up Sequence
• Apply power to CenterLine.
• Lightbar performs a start up sequence.
• Lightbar displays current software version.
• Lightbar displays <START>.
• Using Up or Down, scroll until <SETUP> is displayed on the lightbar. Press Enter.
• Run through the three setup sub-menus <GUIDANCE>, <LIGHTBAR>, and <SYSTEM>. It is
important to have the correct swath width entered.
• Return to the <START> location and press Enter to begin real-time guidance.
CenterLine
CenterLine Quick Start-up
8