User Manual

CenterLine
Software Version 1.05
Text 1
To set the Text 1 setting, go to Lightbar setup, scroll using Up or Down until <TEXT 1> is displayed
in the text window, and press Enter. Using Up or Down scroll through the Text 1 pick list until the
desired message is displayed in the text window. Press Enter to save the setting and advance to
the <TEXT 2> menu item.
Figure 22: Selecting the Text 1 Message
Message Description
X-Track Displays the error (in distance) between the current guideline and the vehicle position.
Swath # Displays the current guideline number.
Ground Speed Displays the vehicle ground speed.
Area Applied Displays the amount of area covered, sprayed, or spread, in acres or hectares.
COG Course on Ground, displays the vehicle heading in degrees.
Off When Off is selected, no message is displayed in this message slot.
Table 7: Text 1 Options
Text 2
To set the Text 2 setting, go Lightbar setup, scroll using Up or Down until <TEXT 2> is displayed in
the text window, and press Enter. Using Up or Down scroll through the Text 2 pick list until the
desired message is displayed in the text window. Press Enter to save the setting and advance to
the STEER BAR? menu item.
CenterLine
CenterLine Setup
21