User Guide v2.02 Owner's manual

CenterLine 2.02

98-05054 R6

CENTERLINE SETUP

CenterLine Setup allows for the configuration of the CenterLine product to best suit current guidance

and mapping needs. For a complete overview of the setup process, refer to Figure 2-31 (page 22).

CenterLine Setup consists of three sub-menus:

• Guidance

• Lightbar

• System

The top level of CenterLine software contains three menus available for selection: <START>,

<SETUP>, and <TOOLS>. To access the setup menus, use the Arrow buttons to scroll to <SETUP>

and press the Enter button. Once in <SETUP> mode, menu options will consist of <GUIDANCE>,

<LIGHTBAR>, and <SYSTEM>. Access to setup options is achieved by pressing the Enter button.

Figure 2-3: CenterLine Setup Flow

Guidance Mode

Guidance Mode allows for the establishment of several parameters that pertain to guidance func-

tionality. To access Guidance Mode, use the Arrow buttons to scroll through the menu selections

until <GUIDANCE> appears on the lightbar. Press the Enter button.

If the first menu item displayed is <SWATH MAN>, Swath Manager 5 has been detected on the sys-

tem and needs to be configured. Refer to CHAPTER 2 - SWATH MANAGER for additional informa-

tion.

Setup

Tools

Guidance

Lightbar

System

Start

Arrow buttons

Enter button