IC18 SPREADER JOB COMPUTER U S E R Software version 1.
COPYRIGHTS © 2011 TeeJet Technologies. All rights reserved. No part of this document or the computer programs described in it may be reproduced, copied, photocopied, translated, or reduced in any form or by any means, electronic or machine readable, recording or otherwise, without prior written consent from TeeJet Technologies. TRADEMARKS Unless otherwise noted, all other brand or product names are trademarks or registered trademarks of their respective companies or organizations.
ISOBUS Job Computer : IC18 Spreader European Table of Contents CHAPTER 1– PRODUCT OVERVIEW OPTIONAL SYSTEM COMPONENTS 1 1 CHAPTER 2 – GETTING STARTED 3 START UP 3 CALCULATION MODE 3 PAGE LAYOUT AND NAVIGATION 4 Home Screen....................................................................................................................................................................4 Transport Mode.............................................................................................
ISOBUS Job Computer : IC18 Spreader European Working Width.......................................................................................................................................................14 Fast Empty Bed RPM...........................................................................................................................................14 Master Switch...............................................................................................................................
ISOBUS Job Computer : IC18 Spreader European CHAPTER 1– PRODUCT OVERVIEW Congratulations on the purchase of your new IC18 Spreader ECU built on the ISOBUS architecture. When used within the guidelines of the this manual, the IC18 controller will be a reliable application tool. This manual covers the European functions of the IC18 ECU. For North America functions, see manual number 98-05173.
ISOBUS Job Computer : IC18 Spreader European OVERVIEW GETTING STARTED SETUP OPERATION APPENDIX 2 www.teejet.
ISOBUS Job Computer : IC18 Spreader European CHAPTER 2 – GETTING STARTED • A firm touch is required when selecting a screen icon. • Settings are NOT automatically saved when selected. The ACCEPT KEY must be selected to save the setting. Select the ESCAPE KEY to escape without saving settings and return to the previous menu. • The console needs to be cycled off and back on when changing or attaching equipment to the system.
ISOBUS Job Computer : IC18 Spreader European PAGE LAYOUT AND NAVIGATION The Master Screen gives access to the systems currently available on your VT. From the Master Screen, the Home Screen gives access to the IC18’s available functions. Home Screen The Home Screen gives access to the IC18’s available functions: Operation Mode, Transport Mode and Main Setup.
ISOBUS Job Computer : IC18 Spreader European Main Setup Mode The main setup menu contains six options. Each of these options either directly access settings or additional menus. Figure 2-7: Main Setup Screen Home Key Back One Screen Forward One Screen Up One Selection Down One Selection Master Screen Key The table below outlines the additional menus and directs you to the setup pages for further information.
ISOBUS Job Computer : IC18 Spreader European Main Setup Menu Icons and Section Overviews Figure 2-8: Enter Selection Screens Selection Slide Bar with Decrease One Selection and Increase One Selection Arrows Accept Key Escape Key Number Pad Close Number Pad Key Range Maximum Range Minimum Zoom In Key Zoom Out Key Open Number Pad Key Available Selections Up One Selection Accept Key Escape Key Down One Selection OVERVIEW GETTING STARTED SETUP OPERATION Section or Icon Description Section or Icon Descri
ISOBUS Job Computer : IC18 Spreader European CHAPTER 3 – MAIN SETUP Main Setup Mode configures the Counters, Job Parameters, Machine, User Interface, Communication and Help options. NOTE: The menu structure on your display might vary from the one displayed in this User Manual depending on the virtual terminal being used. CALCULATION MODE The IC18 job computer is programed to calculate calibrations based on European or North American methods.
ISOBUS Job Computer : IC18 Spreader European Main Setup Screen NOTE: Settings are NOT automatically saved when selected. The ACCEPT KEY must be selected to save the setting. Select the ESCAPE KEY to escape without saving settings and return to the previous menu. To access the Main Setup screens: 1. Select IC18 JOB SPREADER KEY from the Master Screen. 2. Select MAIN SETUP SCREEN KEY from the Home Screen. 3.
ISOBUS Job Computer : IC18 Spreader European Home Screen The Home Screen gives access to the IC18’s available functions: Operation Mode, Transport Mode and Main Setup. • To view the Home Screen, select HOME KEY in the top right corner of any screen. Figure 3-4: Home Screen Home Key on Main Setup Screen COUNTERS The Counters Menu provides an overview of various system counters including Trip Counters, Campaign Counters and Total Counters. From this screen one can also Export Counters.
ISOBUS Job Computer : IC18 Spreader European Trip Counters Trip Counters displays information regarding area, distance, time and amount applied. The trip that is active is displayed/active on the Operations Screen. Figure 3-6: Trip Counters Menu Active Trip Counter One of up to ten (10) Active Trip Counters can be selected to view the desired trip information. The trip that is “active” is displayed/active on the Operation Screen. • To select the Active Trip Counter, use the number pad or slide bar.
ISOBUS Job Computer : IC18 Spreader European Total Counters Total Counters displays information regarding area, amount applied, and time for all Figure 3-10: Total Counters activity. Total Counters can only be cleared in the OEM menu. Area Counter Displays total applied area for all trips. Total Counters cannot be cleared. Amount Counter Displays total amount of material applied during all trips. Total Counters cannot be cleared.
ISOBUS Job Computer : IC18 Spreader European JOB PARAMETERS Job Parameters configures application settings. Options include Active Trip Counter, Application Rate, Tonnage, Gate Height and Density. | Counters 1. From the Main Setup Screen MAIN SETUP MODE MENU STRUCTURE | Job Parameters | Machine | User Interface , select JOB PARAMETERS. | Communication Figure 3-13: Job Parameters NOTE: Settings are NOT automatically saved when selected. The ACCEPT KEY must be selected to save the setting.
ISOBUS Job Computer : IC18 Spreader European MACHINE Machine configures machine settings. Options include Filling, Operation, Implement Parameters, Calibrations, Alarm Configurations and OEM.
ISOBUS Job Computer : IC18 Spreader European Operation Operation establishes Speed Source and Simulated Speed. Figure 3-17: Operation Speed Source Speed Source selects whether to base the machine’s speed on input from the CAN, an Implement or a Simulated source. Selecting “Implement” will allow for the configuration of pulses per 100 meters. Selecting “Simulated” will allow for simulated speed to be entered using the “Edit Value” option.
ISOBUS Job Computer : IC18 Spreader European Calibrations Figure 3-20: Calibrations Calibrations establishes either manual or automatic settings of the sensors. NOTE: For specific calibration options to appear, a specific sensor needs to be installed. Sensor availability is activated on the Sensor Presence screen in the OEM section. Volume Per Pulse Volume Per Pulse establishes the amount of cubic centermieters per one (1) pulse. This value can be established manually or calibrated automatically.
ISOBUS Job Computer : IC18 Spreader European Implement Speed Sensor The Implement Speed Sensor establishes the wheel pulses over a specified distance. This value can be established manually or calibrated automatically. Figure 3-23: Calibrations Manual Calibration Manual calibration establishes the pulses based on a user entered value. • To select the Pulses per Distance, use the number pad or slide bar.
ISOBUS Job Computer : IC18 Spreader European OEM The OEM setup menu is password protected and the settings in this menu are directly related to the fitted OEM equipment. To obtain an access code, contact your local dealer or TeeJet Technologies Customer Service. To access the OEM screens: Figure 3-26: Machine to OEM 1. From the Main Setup Screen , select MACHINE. 2. Select OEM. 3. Select the Access Code Entry Box to the right of the menu option. 4.
ISOBUS Job Computer : IC18 Spreader European USER INTERFACE User Interface allows the operator to select the system virtual terminal (VT) if more than one VT is available on the ISOBUS CAN. | Counters 1. From the Main Setup Screen MAIN SETUP MODE MENU STRUCTURE | Job Parameters | Machine | User Interface | Communication | Help Figure 3-28: User Interface , select USER INTERFACE. NOTE: Settings are NOT automatically saved when selected. The ACCEPT KEY must be selected to save the setting.
ISOBUS Job Computer : IC18 Spreader European HELP The Help menu allows the operator to choose between Diagnostics and the display of information about serial number, CAN BUS information, etc. These menus are typically accessed upon Customer Service personnel request only. | Counters MAIN SETUP MODE MENU STRUCTURE | Job Parameters | Machine | User Interface | Communication | Help Diagnostic About 1. From the Main Setup Screen , select HELP. 2.
ISOBUS Job Computer : IC18 Spreader European Test Output Test Output allows the regulation valve to be tested at different percentages of dutycycle. Figure 3-33: Test Output Test PWM Dutycycle Liquid Valve PWM Dutycycle is used to test the regulating valve at different percentages of dutycycle. • To set the percentage, use the number pad or slide bar. • Press the PLUS/MINUS KEYS to test the regulation valve at the specified dutycycle percentage increase/decrease.
ISOBUS Job Computer : IC18 Spreader European CHAPTER 4 – OPERATION MODE The Operation Screen accesses the working aspects of the IC18 including boom section control, rate control and trip/count/ application information. NOTE: Settings are automatically saved when selected. NOTE: The menu structure on your display might vary from the one displayed in this User Manual depending on the virtual terminal being used.
ISOBUS Job Computer : IC18 Spreader European Section or Icon Description Remaining Bed Contents Displays the remaining bed content NOTE: If no bed sensor is fitted or the contents are not entered in the Filling Menu prior to spraying, Bed Contents will display “0”. Application Rate Displays the actual application rate per hectare/acre NOTE: When the Master is “On” the actual application rate per hectare/acre will be displayed. When the Master is “Off” the target rate is displayed.
ISOBUS Job Computer : IC18 Spreader European START/STOP APPLICATION Figure 4-4: Spraying Stopped Cnt 1 298.2 t 1.14 ha 0.0 500 kg/m kg/ha 1 3 11 Rolr Spnr RPM 0 0 RPM Figure 4-5: Spraying Started Cnt 1 298.2 t 0.0 1.14 ha 500 kg/m kg/ha 1256 Spnr RPM 0 OVERVIEW 0 GETTING STARTED RPM SETUP Rolr OPERATION . APPENDIX Starting/stopping application is controlled using the Start/Stop Keys.
ISOBUS Job Computer : IC18 Spreader European INFORMATION KEY Information Key toggles the Speed/Application Information section on the Operation Screen between the display modes. • Vehicle speed • Volume applied per minute • Target Roller RPM Figure 4-6: Information Key Cnt 1 298.2 t 1.14 ha 0.0 Vehicle speed 500 km/h kg/ha 1 3 11 Cnt 1 Spnr 0 0R.P0M Rolr Volume applied per minute RPM 298.2 t 1.14 ha 0 kg/m 500 kg/ha 1 3 11 Cnt 1 Rolr Ta r g e t RPM 298.
ISOBUS Job Computer : IC18 Spreader European APPENDIX A - FACTORY SETTINGS & RANGES JOB PARAMETERS Description Factory Setting Range/Options User Setting Active Trip Counter 1 1 - 10 1 2 3 4 5 6 7 8 9 10 Application Rate 0.0 lb/ac 0.0 kg/ha 0.0 - 9999 lb/ac 0.0 - 9999 kg/ha Tonnage Off Off On Gate Height 4.0 in 10.0 cm 0.0 - 35.0 in 0.0 - 99.9 cm Density 0 lb/ft3 0.00 kg/l 0 - 300 lb/ft3 0.00 - 5.
ISOBUS Job Computer : IC18 Spreader European Calibrations Pulses per Volume Description Factory Setting Range Pulses per Volume 0.0 /ft 0.0 /cm3 0.0 - 5000 /ft 0.0 - 1500.
I C18 S P R E A D E R J O B CO M P U T E R U S E R M A N U A L Software Version 1.05 European, Volume Based TeeJet Technologies 1801 Business Park Drive Springfield, Illinois 62703 USA Tel: (217) 747-0235 • Fax: (217) 753-8426 www.teejet.
