User Manual

LH 765 G

RAIN LOSS MONITOR

– O

PERATORS MANUAL

& F

ITTING INSTRUCTION

LH A

GRO

LEADING THE CABLES FROM THE WALKER PADS

There must be a loop in the cable between the walker and the machine side as

shown on the following diagram. This loop must be large enough to "capture" the

circular movement of the straw walkers, without affecting the cable too much

(pull/push) when fixing the cable:

Do as follows to determine a suitable loop size:

1. Attach the cable on the underside of the walker approx. 20 cm from the

point at which the cable comes through the walker, as shown hereunder. Be

careful when attaching the cable fastener as this is important for the life of

the cable (see diagram):

20 cm