User Manual Owner manual

97
98-05239 R1 EN
HOME OVERVIEWSETUP POWERAPPENDIX FULL SCREEN INTRODUCTIONGUIDANCE
Figure 7-31: Save Guideline
13:15 7.2 km/h
> 0.0 <
Would you like to name this guideline?
Yes No
13:15 7.2 km/h
> 0.0 <
Enter Name
1 5 92 6 03 74 8
q
Caps
Alt
t
f
v
o
k
Shift
w
a
z
y
g
b
p
l
e
s
x
u
h
n
r
d
c
i
j
m
<---
Figure 7-32: Follow Guidance
0 deg 7.2 km/h
> 0.0 <
Curved AB Guidelines
Curved AB Guidance provides guidance along curved lines based
on an initial AB reference line. This initial baseline is used to
calculate all other curved AB guidelines based on the programmed
guidance width.
Marking A and B Points
To establish an AB guideline:
1. Drive to the desired location of Point A .
2. Press NAVIGATION AND GUIDANCE OPTIONS icon
to
display navigation options.
3. While the vehicle is in motion, press MARK A icon
A
.
4. Following the path of the intended reference line, drive to the
desired location of Point B .
5. Press MARK B icon
B
to establish the AB line.
6. “Would you like to name this guideline?”
Press:
►Yes – to enter a name and save the guideline in the console
►No – to automatically generate a name and save the
guideline in the console
The console will begin providing navigation information.
NOTE: The MARK B icon
B
is not available for selection (greyed
out) until the minimum distance is travelled (3.0 metre).
Use CANCEL MARK icon to cancel the Mark A command and
revert to the previous curved AB guideline (when established).
To establish additional curved AB guidelines, follow the same
steps as the initial curved AB guideline. To toggle between curved
AB guidelines, see “Next Curved AB Guideline Feature”.
Figure 7-33: Mark A Point
13:12 7.2 km/h
Mark A
A