User Manual Owner manual
105
98-05239 R1 EN
HOME OVERVIEWSETUP POWERAPPENDIX FULL SCREEN INTRODUCTIONGUIDANCE
RETURN TO POINT
Return to Point provides guidance back to an established point in
Vehicle View and Field View. In Vehicle View an arrow directs the
vehicle back to the established point. In Field View only the point
is displayed.
A return point is not job specic and will remain active until
canceled.
Marking a Return Point
To mark a return point:
1. Drive to the desired location of Return Point .
2. Press NAVIGATION AND GUIDANCE OPTIONS icon to
display navigation options.
3. Press ADD POINT icon .
Figure 7-59: Return Point Established – Vehicle View
08:19 1.7 km/h
08:21 1.7 km/h
Guidance to a Return Point
To show distance and guidance to the established point:
1. Press NAVIGATION AND GUIDANCE OPTIONS icon to
display navigation options.
2. Press the RETURN TO POINT GUIDANCE icon .
The console will begin providing the distance information on the
Guidance Bar from the vehicle to the established point.
Figure 7-60: Return to Point Guidance – Vehicle View
08:19 1.7 km/h
08:23 1.7 km/h
457 ft
Use CANCEL RETURN TO POINT icon to stop guidance and
delete the established point.
Figure 7-61: Cancel Return to Point Guidance
08:43 1.7 km/h