User Manual Owner manual

110
www.teejet.com
HOMEOVERVIEW SETUP POWER APPENDIXFULL SCREENINTRODUCTION GUIDANCE
Single Camera Selection
One (1) of up to eight (8) camera views can be activated in
RealView Guidance if a Video Selection Module (VSM) is
attached.
When an eight (8) channel VSM is on the system, up to eight (8)
cameras can be installed. When a four (4) channel VSM is on the
system, up to four (4) cameras can be installed.
To change the active single camera view:
1. Press REALVIEW OPTIONS icon to display RealView
options
2. Press the VIDEO icon
.
3. Select the desired CAMERA
A
,
B
,
C
,
D
,
E
,
F
,
G
or
H
to change the active video feed.
Figure 7-74: Camera Selection
0.0 km/h 0 ha
Mark A
0.0 km/h 0 ha
Mark A
A
B
C
E E
F G H
Split Camera View
Split Camera View allows one (1) of two (2) sets of four (4) camera
inputs (A/B/C/D or E/F/G/H) to be selected to divide the screen
into four (4) separate video feeds while in RealView Guidance if a
Video Selection Module (VSM) is attached.
When an eight (8) channel VSM is on the system, up to eight (8)
cameras can be installed. When a four (4) channel VSM is on the
system, up to four (4) cameras can be installed.
To change the active set of split camera views:
1. Press REALVIEW OPTIONS icon to display RealView
options.
2. Press the SPLIT VIEW icon
.
3. Select:
►Cameras A/B/C/D
A
D
B
C
►Cameras E/F/G/H
F
H
E
G
Figure 7-75: Select Split View
0.0 km/h 0 ha
Mark A
0.0 km/h 0 ha
Mark A
A
D
B
C
F
H
E
G
0.0 km/h 0 ha
Mark A