User Manual Owner manual

6
www.teejet.com
HOMEOVERVIEW SETUP POWER APPENDIXFULL SCREENINTRODUCTION GUIDANCE
CONFIGURATIONS
The following diagrams are reective of typical Matrix Pro congurations. Due to the variety of possible congurations, these should be
used for reference purposes only.
Figure 1-6: Matrix Pro w/RealView Camera
16-00022: RealView Camera
Co nne ct to
+1 2v On ly
Power C able
45-05645
Power
Cable, 12V
45-05775
3m Power
Cable, Battery
CAUTION CONN.
TO +12V ONLY
POWER CABLE
45-05775
DC: XXXX
8 Pos.
45-05617: 6m
45-05618: 18m
Camera Extension Cable
5 Pos.
Matrix Pro 570G
75-30082
75-30083 w/GLONASS
Matrix Pro 840G
75-30084
75-30090 w/GLONASS
GPS Antenna
78-50155
78-50190 w/GLONASS
Kit, RAM Mount w/Suction Cup
90-02349 (Matrix 570G)
90-02700 (Matrix 840G)
8 Pos.
78-00046
Switch Box
Work On-Off
Switch
Camera
Matrix
GPS
Speed
Work On-Off
78-00044 xx/xx
Matrix
FieldPilot
BoomPilot
Optional Accessory
Speed Out / Sense In Cable
The Speed Out / Sense In Cable assists the Matrix Pro with two additional connections that:
►Send a radar speed signal to an external device
►Allow the user to operate the area applied function of the Matrix Pro in series with a remote master connection or existing apply on/off
toggle in a single swath manner. However, if the previous connections are not available, the supplied toggle switch will allow area applied
functionality without the need to connect to a functional application implement.
Connecting to different consoles requires different adapters and calibrations.
• If connecting to TeeJet consoles, please use speed adapter 45-20042
◄enter calibration # 914 (#1000 in Europe) for 8xx series in RAD mode
◄enter calibration # 9140 (#10000 in Europe) for below LH 70 Series, LH 85, 500 series, 5000, 6000, IC 18, IC 24 and IC 34
• If connecting to Mid-Tech consoles no adapter is required
◄enter calibration # 1000
• If connecting to Raven consoles use speed adapter 45-05508 (do not connect the 12v red wire from 45-05508)
◄enter calibration # 800