User Manual Owner manual

23
98-05239 R1 EN
HOME OVERVIEWSETUP POWERAPPENDIX FULL SCREEN INTRODUCTIONGUIDANCE
SIMPLE MODE
Once the power up sequence has completed, the Home screen
will appear with the option to start a new job or continue an
existing job.
In simple mode, only one job will be available at a time. Only
bounded and applied area are displayed on the home screen.
Only the current job is available for saving in Reports. Job specic
information input with Fieldware Link is not available.
The console must have GPS before starting or continuing a job.
Figure 4-3: GPS Not Available
14/12/10 03:52
Must have valid GPS signal before starting job.
Please wait.
New Job
Continue
Figure 4-4: Home Screen with Acquired GPS
14/12/10 03:52
Do you want to start a new job data or continue last job?
Starting a new job will clear the previous job data.
New Job
Continue
Figure 4-5: Home Screen with Job Active
14/12/10 06:33
Applied: 17.21 ha
Bounded: --
Close Job
New Job
To start a New Job:
1. Press New Job .
The console will jump to Vehicle View.
Figure 4-6: Start New Job with No Previous Job Started
14/12/10 03:52
Do you want to start a new job data or continue last job?
Starting a new job will clear the previous job data.
New Job
Continue
0.0 km/h 0.00 ha
Mark A