User Manual Owner manual

26
www.teejet.com
HOMEOVERVIEW SETUP POWER APPENDIXFULL SCREENINTRODUCTION GUIDANCE
ADVANCED MODE
Once the power up sequence has completed, the Home screen
will appear with the option to start a new job or continue an
existing job.
In advanced mode, more than one job will be available at any
time. Client, farm, eld, job, bounded area and applied area
are displayed on the home screen. The Job name is the only
information that can be entered using the console. All saved jobs
can be saved in Reports. With Fieldware Link, a user can input
client, farm and eld data as well as duplicate/edit jobs for reuse of
boundaries and guidelines. Client, Farm and Field information can
only be inputted using Fieldware Link.
The console must have GPS before starting or continuing a job.
Figure 4-11: GPS Not Available
14/12/10 03:52
Must have valid GPS signal before starting job.
Please wait.
New Job
Start Job
Figure 4-12: Home Screen with Acquired GPS
4/4/11 06:38
Job
Client: Mr. Nelson
New Job
Field: Nelson Plot No. 23
Farm: Townville Station
Start Job
Fertilise
Figure 4-13: Home Screen with Job Active
14/12/10 06:33
Applied: 17.21 ha
Field: Nelson Plot No. 23
Bounded: --
Farm: Townville Station
Close Job
Job: Fertilise
Client: Mr. Nelson
New Job
To start a New Job with an automatically generated name:
1. Press New Job .
2. Press
Yes to automatically generate a name.
►No – to enter a name using the on screen keyboard
Client, farm and eld information are inputted using Fieldware
Link.
The console will jump to Vehicle View.
Figure 4-14: New Job with Automatic Name
4/4/11 06:38
Job
Client:
New Job
Field:
Farm:
Start Job
4/4/11 06:38
Job
Client:
New Job
Field:
Farm:
Start Job
Loading data, please wait.
0.0 km/h 0.00 ha
Mark A
4/4/11 06:38
Job
Client:
New Job
Field:
Farm:
Start Job
Do you want to automatically generate the job
name?
NoYes
Cancel