User Manual Owner manual

48
www.teejet.com
HOMEOVERVIEW SETUP POWER APPENDIXFULL SCREENINTRODUCTION GUIDANCE
7. Press LEFT arrow .
8. Press the engage/disengage switch or foot switch to activate
the test. This will start a timer as well as turn the vehicle to the
left.
WARNING! When using a UniPilot, the UniPilot will move
the steering wheel very quickly. Keep loose clothing, hair
and hands away from the steering wheel while preforming
this test.
9. Press the engage/disengage switch or foot switch when the
wheels are all the way to the right. The time displayed is the
lock to lock time.
10. Compare the lock-to-lock time with the recommended time.
11. Adjust the valve oil ow as needed and repeat test as needed.
Figure 6-37: Valve Test
Cong-> AutoSteer
Enabled
Valve Setup
Steering Settings
Valve Test
Valve Diagnostics
Options Angle Sensor
On
Cong-> AutoSteer->Valve Test
Note: Press foot switch to activate valve test.
Vehicle speed must be between 0.4 m/s and 3.6 m/s.
0.0 s
Cong-> AutoSteer->Valve Test
Note: Press foot switch to activate valve test.
Vehicle speed must be between 0.4 m/s and 3.6 m/s.
7.3 s
Valve Diagnostics
The valve diagnostic test veries if the valve is operating correctly.
This test is not necessary for UniPilot.
NOTE: The diagnostic tests do not require that the vehicle is in
motion. A valid GPS signal is not required.
Figure 6-38: Valve Diagnostics
Cong-> AutoSteer
Enabled
Valve Setup
Steering Settings
Valve Test
Valve Diagnostics
Angle SensorOptions
On
Cong->AutoSteer->Valve Diagnostics
Note: Press and hold foot switch to activate valve test.
Master